• Aucun résultat trouvé

single-mode fibers

Expanded Beam Connectors for Single Mode Optical Fiber Sensor Applications in Harsh Environment

Expanded Beam Connectors for Single Mode Optical Fiber Sensor Applications in Harsh Environment

... small mode field diameters (MFD), single mode fibers are very sensitive to contaminants, laser power and alignment defaults either lateral ∆ x, axial ∆ z or angular θ when injecting signal ...

5

Study of the atmospheric refraction in a single mode instrument - Application to AMBER/VLTI

Study of the atmospheric refraction in a single mode instrument - Application to AMBER/VLTI

... at extreme wavelengths. No correction is necessary in K-band. 2.3.3 Simultaneous observations The results above consider observations in individual band- widths. Let us now assume simultaneous observations in the three ...

16

Design and characterization of few-mode fibers for space division multiplexing on fiber eigenmodes

Design and characterization of few-mode fibers for space division multiplexing on fiber eigenmodes

... chapter, mode division multiplexing (MDM) represents a valid solution to multiplex the information data in the space dimension, and consequently overcome the imminent ʻcapacity crunchʼ of our system ...multimode ...

131

Towards Large-Mode-Area fibers fabricated by the full vapor-phase SPCVD process

Towards Large-Mode-Area fibers fabricated by the full vapor-phase SPCVD process

... efficiency and their resistance to photodarkening. 2. PREFORM FABRICATION 2.1 Presentation of the SPCVD process First described by Pavy et al. in 1986 10 , the SPCVD process was used for the production of ...

11

Radiation resistant single-mode fiber with different coatings for sensing in high dose environments

Radiation resistant single-mode fiber with different coatings for sensing in high dose environments

... Fig. 3. Online RIA at 1310 nm and 1550 nm for ACR.2 coated fiber under irradiation up to 3.0 MGy(SiO 2 ) The obtained online RIA at 3.0 MGy(SiO 2 ), 20 dB/km at 1310 nm and 27 dB/km at 1550 nm, are higher than the ...

8

Linear and nonlinear optical properties of carbon nanotube-coated single mode optical fiber gratings

Linear and nonlinear optical properties of carbon nanotube-coated single mode optical fiber gratings

... tributing that interaction along the fiber length [ 4 – 6 ]. Nevertheless, manufacturing and handling these kinds of fibers is quite complex and delicate. In this work we propose for the first time SWNT deposition ...

4

Reliable Expanded Beam Connectors for Single Mode Optical Fiber Sensor Applications in Harsh Environment

Reliable Expanded Beam Connectors for Single Mode Optical Fiber Sensor Applications in Harsh Environment

... small Mode Field Diameters (MFD), SMF are very sensitive to contaminants, laser power and alignment defaults either lateral x, axial z or angular  when injecting signal from one fiber to one another whatever ...

5

Fibers from polymeric nanocomposites

Fibers from polymeric nanocomposites

... / La version de cette publication peut être l’une des suivantes : la version prépublication de l’auteur, la version acceptée du manuscrit ou la version de l’éditeur. Access and use of [r] ...

15

Nanowire waveguides launching single photons in a Gaussian mode for ideal fiber coupling

Nanowire waveguides launching single photons in a Gaussian mode for ideal fiber coupling

... the single exciton photo- luminescence, presented in Figure 2a, is shown in the color plot of Figure ...a single exciton in the quantum dot is oriented perpendicular to the nanowire ...a single ...

6

Reliable Expanded Beam Connector Compliant with Single-mode Fiber Transmission at 10 Gbit/s

Reliable Expanded Beam Connector Compliant with Single-mode Fiber Transmission at 10 Gbit/s

... Fig. 2b shows an example of the bit-error-rate (BER) measurement of the connectors compared to the back-to-back (B2B) case. No penalty is observed. We have demonstrated the use of large mode LC/PC connectors at 10 ...

4

Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression

Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression

... carbon fibers, stainless steel fibers, and glass ...glass fibers is 8.4 MPa. For glass fibers and carbon fibers, the second part of the compression curves, which corresponds to the ...

11

Precision of multiplex CARS temperatures using both single-mode and multimode pump lasers

Precision of multiplex CARS temperatures using both single-mode and multimode pump lasers

... The use of these measured detector noise variances as weighting parameters in a weighted least-mean- squares fit of experimental and theoretical CARS spectra is shown to i[r] ...

13

Injection-molded composites based on recycled carbon fibers and natural fibers

Injection-molded composites based on recycled carbon fibers and natural fibers

... PP & PA6 minerals filled or glass fibers reinforced.  Integrate up to 30 wt.% recycled and renewable content;  Are up to 10 % lighter than conventional reference materials;  Have neutral or lower cost ...

36

Characterization of Few Mode Fibers by OLCI Technique

Characterization of Few Mode Fibers by OLCI Technique

... where S(  ) and are the power spectrum of the OLCI source and the complex transmission coefficient of the DUT, respectively. It is therefore possible to deduce the GD by extraction and derivation of the wavelength ...

4

Globally Stable Implicit Euler Time-Discretization of a Nonlinear Single-Input Sliding-Mode Control System

Globally Stable Implicit Euler Time-Discretization of a Nonlinear Single-Input Sliding-Mode Control System

... sliding mode algorithm is finite-time reaching of the sliding surface by trajec- tories of the closed-loop ...sliding mode systems has been done in [13], [17], [20], ...sliding mode control design ...

7

Development of a single-mode interstitial rotary probe for In Vivo deep brain fluorescence imaging

Development of a single-mode interstitial rotary probe for In Vivo deep brain fluorescence imaging

... the mode field diameter, MFD, is a cross-sectional dimension corresponding to 2ω 0 ...Gaussian mode can be found to dominate the fibre mode, the exact expansion expression should be considered in the ...

94

Détection et caractérisation de nanoparticules d’oxyde de zinc par spectrométrie de masse à plasma inductif en mode particule unique (single-particle ICPMS)

Détection et caractérisation de nanoparticules d’oxyde de zinc par spectrométrie de masse à plasma inductif en mode particule unique (single-particle ICPMS)

... Abstract The increased production, use and release of engineered nanomaterials (NM) is concerning considering their possible persistence in the environment and their potential toxic issues. Unfortunately, actual ...

141

Stress measurements on fibers and preforms

Stress measurements on fibers and preforms

... In the upper part both outside (silica tubes) and inside (cladding and core doped silica) are over their glass transition temperature ( T, ).. In the middle part at lower te[r] ...

5

Polymer nanocomposites fibers and applications

Polymer nanocomposites fibers and applications

... spun fibers (3,4), fiber-based structures for biomedical applications have been proposed, mainly based however on bone-like ceramic nanoparticles and bioresorbable polymers, but very few if any focused on ...

6

Accurate measurement of the longitudinal thermal conductivity and volumetric heat capacity of single carbon fibers with the 3ω method

Accurate measurement of the longitudinal thermal conductivity and volumetric heat capacity of single carbon fibers with the 3ω method

... carbon fibers obtained under vacuum showed high precision with respect to the reference ...carbon fibers is mainly due to the discrepancy of the diameter through the length of ...carbon fibers ...

19

Show all 3735 documents...

Sujets connexes