Charge injection
Influence of dielectric layer thickness on charge injection, accumulation and transport phenomena in thin silicon oxynitride layers: a nanoscale study
... performed charge injection, shows distinguished behavior for ultrathin (d < 15 nm) and thin (15 nm < d < 150 nm) dielectric ...the charge injection step the electric field in the ...
27
Interface tailoring for charge injection mitigation in insulators: Different principles and achievements
... Although charge injection control was investigated on laboratory structures, the work displays a panel of interface tailoring routes. Useful information is brought on process constrains, issues and merit ...
6
Charge injection mitigation in polyethylene induced by silver nanoparticles containing organosilicon barrier layer as demonstrated by conductivity measurements
... space charge under electrical and/or thermal stresses which can significantly reduce the component reliability [1, 2] owing to excursions in the internal electric fields beyond the design field, triggering ...
3
Barrier effect to charge injection in polyethylene by silver nanoparticles containing plasma polymer composites investigated by conductivity measurements
... Keywords—charge injection, injection mitigation, nanocomposite layer, thin dielectric, plasma processes ...space charge under electrical and/or thermal stresses which can significantly reduce ...
5
Handling Geometric Features in Nanoscale Characterization of Charge Injection and Transport in thin Dielectric Films
... the charge injection mechanism the radial electric field influences the charge lateral spreading whereas the axial electric field governs the amount of injected ...
5
Charge injection in thin dielectric layers by atomic force microscopy: influence of geometry and material work function of the AFM tip on the injection process
... results Charge injection was performed under tip bias varying from -25V to 25V in 5V steps applied for ...the charge injection was achieved on a new position on the a-SiO x N y :H layer away ...
21
Charge injection phenomena at the metal/dielectric interface investigated by Kelvin probe force microscopy
... probe charge injection phenomena at metal/dielectric interface and charge motion in dielectric layers by using KPFM ...space charge distribution at local scale is necessary to understand ...
12
Interface tailoring for charge injection control in polyethylene
... space charge, tailoring interfaces, charge injection ...space charge under HVDC conditions with possibly two major consequences: (i)- the internal electric field distribution is not anymore ...
14
Silver nanoparticles as a key feature of a plasma polymer composite layer in mitigation of charge injection into polyethylene under dc stress
... of charge injection appears therefore as a characteristic of isolated AgNPs with a size distribution of the order of 15 ...the charge mitigation by the NPs is observed under both polarities of the ...
25
In Situ Optical Monitoring of the Electrochemical Conversion of Dielectric Nanoparticles: From Multistep Charge Injection to Nanoparticle Motion
... ABSTRACT: By shortening solid-state diffusion times, the nanoscale size reduction of dielectric materials -such as ionic crystals- has fueled synthetic efforts towards their use as nanoparticles, NPs, in electrochemical ...
11
Fragmentation in spin ice from magnetic charge injection
... a charge q = +1 (red disc with black border) diffuses in the fragmented regime Spatial periodic potential V α q felt by the diffusing charge and induced by the underlying static charge crystal, where ...
7
Space Charge at Nanoscale: Probing Injection and Dynamic Phenomena Under Dark/Light Configurations by Using KPFM and C-AFM
... Parameters of outmost value, when dealing with interfaces, are the energy level estimations of one material relative to the other one as they determine the working conditions of the device. When going to thin films, ...
28
Étude de synchronisation de chaos par simple injection optique
... 5.2.5 Mesure de faibles puissances par injection optique Comme le montre la figure 5.3 ( cf page 61), l’observation directe du spectre optique du laser injecté permet de mettre en évidence la présence du signal ...
263
Injection de fautes par impulsion laser dans des circuits sécurisés
... ]. ................................................................................................................................. 46 Figure I. 30. Modélisation TCAD du transistor impacté par le faisceau laser [Dod95]. ...
219
Cooling channel optimization for injection molding
... great influence on the quality of the final parts that are produced, as well as on the molding cycle time. We introduce an optimization procedure in order to locate automatically the cooling channels in 3D ...
7
Tendon lesion and VEGF-111 injection
... VEGF-111. These results were already noticed from day 5 onwards. The ratio between force and weight increased with time in both groups, but this ratio was greater for tendons which had been submitted to an ...
2
Simulation tridimensionnelle du remplissage de corps minces par injection
... par injection des polymères est un procédé de mise en forme cyclique permettant la production en grandes séries de pièces complexes aux tolérances dimensionnelles ...
152
Fabrication de panneaux auto-raidis par injection flexible
... Dans la fabrication par injection flexible, l’imprégnation et la consolidation du laminé se font par le biais d’un liquide injecté dans la chambre de compaction. Dans cette optique, un système a été développé ...
158
EM Injection: Fault Model and Locality
... A. Device Under Test The DUT adopted to conduct our experiments is an FPGA (xilinx Spartan 3E-1000), designed with a 90nm process, on which four functional blocks have been mapped. The first is a Finite State Machine ...
12
Modeling the injection of textured molds
... Abstract : Micro-injection molding is frequently used in micro-medical, micro-optic and micro-mechanics due to its ef- fectiveness for mass production. This work focuses mainly on offering numerical tools to model ...
6