• Aucun résultat trouvé

[PDF] Top 20 Phononic engineering with nanostructures for hot carrier solar cells

Has 10000 "Phononic engineering with nanostructures for hot carrier solar cells" found on our website. Below are the top 20 most common "Phononic engineering with nanostructures for hot carrier solar cells".

Phononic engineering with nanostructures for hot carrier solar cells

Phononic engineering with nanostructures for hot carrier solar cells

... Abstract: Hot Carrier solar cells have long been recognized as an attractive contender in the search for high efficiency photovoltaic devices but their fabrication requires solution of ... Voir le document complet

4

Detailed balance calculations for hot-carrier solar cells: coupling high absorptivity with low thermalization through light trapping

Detailed balance calculations for hot-carrier solar cells: coupling high absorptivity with low thermalization through light trapping

... Abstract. Hot-carrier solar cells could enable an efficiency gain compared to conventional cells, provided that a high current can be achieved, together with a ... Voir le document complet

10

Charge Carrier Relaxation in Colloidal FAPbI3 Nanostructures Using Global Analysis

Charge Carrier Relaxation in Colloidal FAPbI3 Nanostructures Using Global Analysis

... Keywords: hot charge carrier relaxation; Auger recombination; colloidal perovskite nanocrystals; transient absorption spectroscopy ...materials for several optoelectronic applications as solar ... Voir le document complet

16

Fabrication and investigation of heterojunction solar
cells based on near infrared quantum dots and one
dimensional nanostructures.

Fabrication and investigation of heterojunction solar cells based on near infrared quantum dots and one dimensional nanostructures.

... in solar cells could also be an effective way to address one of the present challenges in solar cell technology, which is decreasing semiconductor material cost through using thinner films, while ... Voir le document complet

116

15.7% Efficient 10-μm-Thick Crystalline Silicon Solar Cells Using Periodic Nanostructures

15.7% Efficient 10-μm-Thick Crystalline Silicon Solar Cells Using Periodic Nanostructures

... and Engineering Initiative of the National Science Foundation under NSF Award Number CMMI-0751621 through the Center for Scalable and Integrated Nanomanufacturing at ...article for more ...MIT ... Voir le document complet

19

Fabrication and investigation of III-V quantum structured  solar cells with Fabry-Pérot cavity and nanophotonics  in order to explore high-efficiency photovoltaic concepts : towards an intermediate band assisted hot carrier solar cell

Fabrication and investigation of III-V quantum structured solar cells with Fabry-Pérot cavity and nanophotonics in order to explore high-efficiency photovoltaic concepts : towards an intermediate band assisted hot carrier solar cell

... efficiencies for different PV devices compared with the SQ limit of single-junction with Silicon and GaAs semiconductor ...biannual Solar cell efficiency tables ...single-junction solar ... Voir le document complet

289

Quantitative experimental assessment of hot carrier-enhanced solar cells at room temperature

Quantitative experimental assessment of hot carrier-enhanced solar cells at room temperature

... crucial for minimizing the uncertainty in the evaluation of the thermodynamic properties T and µ in the equation 1 (see section Methods and the Supplementary Notes 1 and ...spectra with the external quantum ... Voir le document complet

17

HOT CARRIER SOLAR CELLS : IN THE MAKING ?

HOT CARRIER SOLAR CELLS : IN THE MAKING ?

... ABSTRACT: Hot carrier solar cells allow potential efficiency close to the thermodynamical limit in ideal ...ideal cells were considered in previous studies. Here we develop a model ... Voir le document complet

4

One-dimensional electron transport layers for perovskite solar cells

One-dimensional electron transport layers for perovskite solar cells

... demand for energy has spurred research efforts to find new and improved sources of cheap, environmentally neutral, renewable ...Inorganic solar cells based on materials such as crystalline silicon, ... Voir le document complet

28

23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability

23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability

... averaged for 5 seconds at each ...sub-cell with a 980 nm laser diode from ThorLabs and the perovskite sub-cell with a white light LED array to measure the EQE of the perovskite and silicon ... Voir le document complet

28

Multi-resonant absorption in ultra-thin silicon solar cells with metallic nanowires

Multi-resonant absorption in ultra-thin silicon solar cells with metallic nanowires

... range. With a period of 200 nm, the grating leads to the excitation of guided modes in both TE and TM polarizations at a wavelength close to 700 ...6(a) for TM ... Voir le document complet

11

Preliminary basic design of astrid hot cells

Preliminary basic design of astrid hot cells

... cranes for heavy loads, able to cover the entire cell, are also foreseen in the ...the hot cells (dimensioning of the concrete walls for the radiation shielding of representative gamma ray and ... Voir le document complet

11

Innovative system of visualization in hot cells

Innovative system of visualization in hot cells

... 1 CEA Marcoule ; DEN/DTEC/SDTC/LTAP, 30207 Bagnols sur Cèze ; France 2 GETINGE La Calhène ; 1140 rue Ampère, CS 80544, F – 13594 Aix-en-Provence ; France Abstract In today’s nuclear industry R&D and production ... Voir le document complet

5

Thiazole-based scaffolding for high performance solar cells

Thiazole-based scaffolding for high performance solar cells

... Rhin- Solar project (nr C25) and the French National Research Agency (ANR ORION project ...acknowledged for the prepara- tion of some of these compounds and ...(PAL) for giving us the opportunity to ... Voir le document complet

9

Towards anode with low indium content as effective anode in organic solar cells

Towards anode with low indium content as effective anode in organic solar cells

... the cells we have calculated the series, R s , and shun, R sh , resistances of the OPV ...of solar cell consists of current photogenerator connected in parallel with a diode, which represents the I–V ... Voir le document complet

8

High efficiency mesoscopic solar cells using CsPbI3 perovskite quantum dots enabled by chemical interface engineering

High efficiency mesoscopic solar cells using CsPbI3 perovskite quantum dots enabled by chemical interface engineering

... 13. Wang, Y.; Dar, M. I.; Ono, L. K.; Zhang, T.; Kan, M.; Li, Y.; Zhang, L.; Wang, X.; Yang, Y.; Gao, X.; Qi, Y.; Grätzel, M.; Zhao, Y., Thermodynamically stabilized β-CsPbI 3 –based perovskite solar cells ... Voir le document complet

26

Characterization of hot-carrier reliability in analog sub-circuit design

Characterization of hot-carrier reliability in analog sub-circuit design

... * If we trace the simulated degradation of the device as a function of (stress) time, we will notice that errors in the SPICE model and parameter extraction procedure[r] ... Voir le document complet

56

Biologically engineering nanostructures to maximize energy, electron, and ion transport

Biologically engineering nanostructures to maximize energy, electron, and ion transport

... absorbs solar radiation and transports excitation energy with nearly 100% efficiency to a reaction center where it is converted into chemical energy ...relevant for efficient solar energy ... Voir le document complet

168

Amniotic Fluid-Derived Stem Cells for Cardiovascular Tissue Engineering Applications

Amniotic Fluid-Derived Stem Cells for Cardiovascular Tissue Engineering Applications

... success with c-kit-sorted cells, c-kit expression is not maintained after subsequent ...reason for transdifferentiation of developmentally mature tissues from one tissue to ...cocultures for ... Voir le document complet

13

Impact of Hot Carrier Aging on the Performance of Triple-Gate Junctionless MOSFETs

Impact of Hot Carrier Aging on the Performance of Triple-Gate Junctionless MOSFETs

... further, for stress time exceeding 200 s (stress time domain 2), the interface states and threshold voltage degradation rates are increased following a time dependent law of the form ~ t ... Voir le document complet

7

Show all 10000 documents...