• Aucun résultat trouvé

Porous material

The mechanism by which water moves through a porous material subjected to a temperature gradient. I. Introduction of a vapor gap into a saturated system

The mechanism by which water moves through a porous material subjected to a temperature gradient. I. Introduction of a vapor gap into a saturated system

... This publication could be one of several versions: author’s original, accepted manuscript or the publisher’s version. / La version de cette publication peut être l’une des suivantes : la version prépublication de ...

13

Determination of Chlorinated Solvent Sorption by Porous Material-Application to Trichloroethene Vapor on Cement Mortar

Determination of Chlorinated Solvent Sorption by Porous Material-Application to Trichloroethene Vapor on Cement Mortar

... Abstract Experiments have been performed to investigate the sorption of trichloroethene (TCE) vapor by concrete material or, more specifically, the cement mortar component. Gas- flow experiments were conducted ...

15

Modelling Heat and Mass Transfer in Porous Material during Pyrolysis using Operator Splitting and Dimensionless Analysis

Modelling Heat and Mass Transfer in Porous Material during Pyrolysis using Operator Splitting and Dimensionless Analysis

... [7] Florio, J., Henderson, J. B., Test, F. L., and Hariharan, R., “A Study of the Effects of the Assumption of Local- Equilibrium on the Overall Thermally-Induced Response of Decomposing, Glass-Filled Polymer ...

16

Aggregation morphological model with variable fractal dimension from colloidal system to porous material

Aggregation morphological model with variable fractal dimension from colloidal system to porous material

... mechanism, which is particle-cluster, indeed at each iteration an elementary particle is added to the aggregate. This naturally leads to more compact structures than a cluster- cluster mechanism (Schaefer, 1990). This ...

38

Electrokinetic coupling in unsaturated porous media

Electrokinetic coupling in unsaturated porous media

... charged porous material that is saturated by two fluid phases that are immiscible and continuous at the scale of a representative elementary ...The material properties entering the macroscopic ...

46

POROUS SILICON AMMONIA GAS SENSOR

POROUS SILICON AMMONIA GAS SENSOR

... The optical intensity at the exit of the FWG is measured by a silicon photodiode (Si-PD). The output voltage (V) is recorded as a function of time when the FWG is exposed to ammonia gas. Without ammonia, the recorded ...

9

Material acquisition using deep learning

Material acquisition using deep learning

... Architecture Evaluation Each input image is processed by a copy of the one image method encoder-decoder to produce a feature map. While the number of images and network copies can vary, a pooling layer fuses the output ...

2

Archival material and site investigations

Archival material and site investigations

... This publication could be one of several versions: author’s original, accepted manuscript or the publisher’s version. / La version de cette publication peut être l’une des suivantes : la version prépublication de ...

11

Bridge : information as material for design

Bridge : information as material for design

... One of the areas in the voxel information where the wind was strong, and light and the water movement was weak, (which was color coded green in the previous process), was reg[r] ...

82

LATENITE: hygrothermal material property database

LATENITE: hygrothermal material property database

... the material on it are subject to the Terms and Conditions set forth at LATENITE: hygrothermal material property database Karagiozis, Achilles; Salonvaara, Mikael; Kumaran, ...

90

Carbazole-based material: synthesis, characterization, and application as hole transporting material in perovskite solar cells

Carbazole-based material: synthesis, characterization, and application as hole transporting material in perovskite solar cells

... 2 PSC’s device structure is highly important for the devices to be efficient and stable.[1] In this context, accurate design of HTL is of major interest. The HTL is usually made from a single hole transporting ...

12

Volume instability of porous solids: part 2: dissolution of porous silica glass in sodium hydroxide

Volume instability of porous solids: part 2: dissolution of porous silica glass in sodium hydroxide

... This publication could be one of several versions: author’s original, accepted manuscript or the publisher’s version. / La version de cette publication peut être l’une des suivantes : la version prépublication de ...

12

The Material Traces of Journalism

The Material Traces of Journalism

... the material traces left in successive discourses by a specific object enables us to trace its concrete material in the collective and changing news production process: how do news producers use the object, ...

19

Multidimensional Poverty and Material Deprivation

Multidimensional Poverty and Material Deprivation

... Abstract We examine the measurement of multidimensional poverty and material deprivation fol- lowing the counting approach. In contrast to earlier contributions, dimensions of well- being are not forced to be ...

23

HgTe, the Most Tunable Colloidal Material: from the Strong Confinement Regime to THz Material

HgTe, the Most Tunable Colloidal Material: from the Strong Confinement Regime to THz Material

... mature material [26] under colloidal ...the material still suffers from limitations such as sensitivity to air, [38] tendency to sinter even under mild temperature annealing and presence of heavy ...key ...

10

Recent Advances in Material Homogenization

Recent Advances in Material Homogenization

... of material homogenization is defining macroscopic homogeneous properties able to represent at the macroscopic scale the real material and allowing for ignoring the microscopic scale in the numerical ...

5

Discrete Element Method, a Tool to Investigate Complex Material Behaviour in Material Forming

Discrete Element Method, a Tool to Investigate Complex Material Behaviour in Material Forming

... - A great number of dissociated elements must be taken into account, - A great number of default is encountered The main recent fields of applications are multi-fractures problems, where detached elements must be taken ...

11

Flow in highly permeable porous media

Flow in highly permeable porous media

... Turbulent flows in porous media (continued) Turbulent flows in porous media (continued)  Localized Turbulence: i.e., nearly periodic (see Jin et al., 2015 for DNS results) – Slow unsteady flows → ...

50

Hardness Evaluation of Porous Hydroxyapatite Coating

Hardness Evaluation of Porous Hydroxyapatite Coating

... 3 ENSAM/LMPGM CNRS UMR 8517, 8 Bd . Louis XIV, 59046 Lille Cedex, France Abstract–- The extensive use of appropriate coatings to improve wear resistance, friction coefficient, electrical properties, corrosion resistance ...

5

Elaboration of soft porous ultrasound insulators

Elaboration of soft porous ultrasound insulators

... of porous PDMS beads (sample MF3), the attenuation coefficient exhibits a clear acoustic resonance around 300 kHz and, for frequencies lower than ~500 kHz, the resulting acoustic absorption is by far higher than ...

14

Show all 1649 documents...

Sujets connexes