Science Arts & Métiers (SAM)

However, the aim is to control the sled’s acceleration, therefore the servo-control of acceleration was tested using both a Heaviside step function and a sinusoidal function Equation

The basic principle is to measure the phase lag and the amplitude of the periodic temperature response produced on the sample surface by a modulated laser beam.19A thermal diffusion

Sections 3.1.1, 3.1.2 and 3.1.3 deal withthe injection of the investigated standard yield stress fluid through the different porous media, in order to assess the ef-

The goal of the present study is twofold: i to assess the capa- bility of a high-order shock-capturing central scheme, used in our previous works [32,35], to robustly predict

The trajectories in the stress/strain plane in figure 8 left, and even more convincingly in the instant modu- lus/strain plane in figure 8 right, illustrate the features to be

Conclusions The experimental and numerical studies developed in this work, to analyze angular scratches 10, 20 and 30° on low carbon steel, provide the following conclusions: •The

The aim of this research is to evaluate: i some problems en- countered during the printing process of the PA6, and when they are overcome and successful print is attained, ii the effect

Schematization of the finishing gesture activity targeted by the cobotization project This diagram shows the following dimensions: − Finishing work mobilizes knowledge about products,