Science Arts & Métiers (SAM)

For the modeling of single reed wind instruments four objects are distinguished: the mouthpiece with reed, the tube, the tone hole with possible closing by a finger or a key, and

Laurent LANGLOIS, Régis BIGOT, Saïd ETTAQI - Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process - 2008. Any correspondence

Laurent LANGLOIS, Régis BIGOT, Saïd ETTAQI - Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process - 2008. Any correspondence

Ahmadi Institute of Mechanical Engineering I2M, TREFLE department, Arts et Métiers ParisTech - Talence, 33400 Key words: porous media, numerical simulation, inertial effects,

The main aim of this research is to find the consequences of the drill wear on the surface quality of the hole such us the uncut fibers and dimensional variation of the diameter in the

Since at high stress amplitudes, the thermal and mechanical properties of the material can be changed because of the high temperature increase, this formulation was used to measure the

As reported in the literature [16], the morphology of the coating is directly influenced by the surface conditions of the substrate, notably roughness or irregularities, suggesting that

Industrial fluxless laser weld-brazing process of steel to aluminium at high brazing speed Guillaume Filliarda,b,∗, Mohamed El Mansoria, Lucio Tiradob, Sabeur Mezghania, Christian