Science Arts & Métiers (SAM)

The localization method is based on the following physical phenomenon: a finger contact modifies the energy distribution of acoustic wave in a solid; these variations depend on the wave

- In welding configuration, when the incident beam is Gaussian, the conduction-to-keyhole transition occurs when the deflection of liquid/gas interface reaches a threshold depth, equals

This simulation will allow the user to perform the endotracheal intubation procedure with the assistance of a laryngoscope and other necessary steps in a realistic virtual reality

Also true for the steel SNC that the hardness improves after plasma nitriding at a higher temperature of 500°C for 10 h and the present study has shown the significant improvement of

However, the aim is to control the sled’s acceleration, therefore the servo-control of acceleration was tested using both a Heaviside step function and a sinusoidal function Equation

The basic principle is to measure the phase lag and the amplitude of the periodic temperature response produced on the sample surface by a modulated laser beam.19A thermal diffusion

As a conclusion on the study of the impact of thermal ox- idation on mechanical properties of two PDCPD stabilized with the usually used BHT in industrial PDCPD formulations and the

The goal of the present study is twofold: i to assess the capa- bility of a high-order shock-capturing central scheme, used in our previous works [32,35], to robustly predict