Science Arts & Métiers (SAM)

coatings and the substrate (X38CrMoV5). b) Microstructure of steel substrate close to the interface interface. c) Microstructure of Co-based alloy Coating close to the interface.

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..

11.Multiscale surface roughness spectrums drawn at each cutting depth for different cutting speeds at the cutting edge radius rε= 27μm.. 12.Multiscale contribution rate of each process

AUTHORS VERSION Vector Control Of Piezoelectric Transducers and Ultrasonic Actuators Sofiane Ghenna, Fr ´ed ´eric Giraud,Member, IEEE, Christophe Giraud-Audine,Member, IEEE, and

Forearms Cyclic lever Arms Collective lever Figure 8.Positionning of the pilot in the cabin Aeroelastic rotorcraft and rotor actuation system The rotorcraft model is based on

Pincers' opening Amplitudes in µm out.cyl.: outer cylinder in.cyl.: inner cylinder Residual 6,1 1,1 1,1 8,7 0 2 4 6 8 10 Initial residual Final residual Values in mm Simulated

Computers in Industry Challenges for Data-Driven Design in Early Physical Product Design: A Scientific and Industrial perspectives --Manuscript Draft-- Manuscript Number:

3.4 3D LIVE UX and QoE Model Within 3D LIVE, the Rational and Experiential Model represents the Immersive User Experience IUX as supporting instantaneously occurring experience while