Science Arts & Métiers (SAM)

coatings and the substrate (X38CrMoV5). b) Microstructure of steel substrate close to the interface interface. c) Microstructure of Co-based alloy Coating close to the interface.

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..

Traces of it were also found in membrane, 10 hour extract and residual membrane after 6 0 hours autoclaving for both inner and outer membranes from Arbor Acres shells but

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/16978 To cite this version : Giulia BERTOLINO, Marco MONTEMURRO, Giorgio

11.Multiscale surface roughness spectrums drawn at each cutting depth for different cutting speeds at the cutting edge radius rε= 27μm.. 12.Multiscale contribution rate of each process

AUTHORS VERSION Vector Control Of Piezoelectric Transducers and Ultrasonic Actuators Sofiane Ghenna, Fr ´ed ´eric Giraud,Member, IEEE, Christophe Giraud-Audine,Member, IEEE, and

In this framework, a feature-based part variety model is proposed to represent a part family; A reconfigurable machining process plan is defined as a set of modular components which can

[1], studied numerically the heat transfer by laminar mixed convection in a concentric annulus, the inner cylinder subjected to constant heat flux, while the outer cylinder