Science Arts & Métiers (SAM)

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..

11.Multiscale surface roughness spectrums drawn at each cutting depth for different cutting speeds at the cutting edge radius rε= 27μm.. 12.Multiscale contribution rate of each process

In this framework, a feature-based part variety model is proposed to represent a part family; A reconfigurable machining process plan is defined as a set of modular components which can

EXPERIMENTING THE INTERACTION EFFECT BETWEEN A PHYSICAL AND A HUMAN-CONTROLLED VIRTUAL ACTOR IN THEATRICAL PERFORMANCES Anastasiia Ternova Université Paris 8

The basic principle is to measure the phase lag and the amplitude of the periodic temperature response produced on the sample surface by a modulated laser beam.19A thermal diffusion

Sections 3.1.1, 3.1.2 and 3.1.3 deal withthe injection of the investigated standard yield stress fluid through the different porous media, in order to assess the ef-

As a conclusion on the study of the impact of thermal ox- idation on mechanical properties of two PDCPD stabilized with the usually used BHT in industrial PDCPD formulations and the

In short, the capability of laser cladding the CM247LC alloy was shown to depend on its local microstructure: for local pre-heating temperature below 1100 °C, dissolution of large