Science Arts & Métiers (SAM)

- In welding configuration, when the incident beam is Gaussian, the conduction-to-keyhole transition occurs when the deflection of liquid/gas interface reaches a threshold depth, equals

For the action "Optimize the whole product to minimize releases during distribution phase", two structuring of the problem have been proposed Table 2: In the first case, the

However, the aim is to control the sled’s acceleration, therefore the servo-control of acceleration was tested using both a Heaviside step function and a sinusoidal function Equation

CONCLUSION The Proper Generalized Decomposition method associated with the Discrete Empirical Interpolation Method has been applied to solve a 3D non-linear FE magnetostatic problem

Since at high stress amplitudes, the thermal and mechanical properties of the material can be changed because of the high temperature increase, this formulation was used to measure the

The basic principle is to measure the phase lag and the amplitude of the periodic temperature response produced on the sample surface by a modulated laser beam.19A thermal diffusion

Sections 3.1.1, 3.1.2 and 3.1.3 deal withthe injection of the investigated standard yield stress fluid through the different porous media, in order to assess the ef-

From a pure Ti to tetragonal Ti2N and cubic Ti-N microstructures, the films showed a 111 TiN plane growth that led to an increase in the lattice strain and a decrease in the grain size