Science Arts & Métiers (SAM)

Laurent LANGLOIS, Régis BIGOT, Saïd ETTAQI - Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process - 2008. Any correspondence

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/16978 To cite this version : Giulia BERTOLINO, Marco MONTEMURRO, Giorgio

- In welding configuration, when the incident beam is Gaussian, the conduction-to-keyhole transition occurs when the deflection of liquid/gas interface reaches a threshold depth, equals

This simulation will allow the user to perform the endotracheal intubation procedure with the assistance of a laryngoscope and other necessary steps in a realistic virtual reality

Iconography-based 3D reconstruction section 4 • 3D surveying of the current state of the building • Spatial and temporal referencing of iconography sources • Image-based

Study of a Supercapacitor Energy Storage System designed to reduce frequency modulation on shipboard electric power system Franck Scuiller Institut de Recherche de l’Ecole Navale,

However, the aim is to control the sled’s acceleration, therefore the servo-control of acceleration was tested using both a Heaviside step function and a sinusoidal function Equation