Science Arts & Métiers (SAM)

coatings and the substrate (X38CrMoV5). b) Microstructure of steel substrate close to the interface interface. c) Microstructure of Co-based alloy Coating close to the interface.

Laurent LANGLOIS, Régis BIGOT, Saïd ETTAQI - Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process - 2008. Any correspondence

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..

AUTHORS VERSION Vector Control Of Piezoelectric Transducers and Ultrasonic Actuators Sofiane Ghenna, Fr ´ed ´eric Giraud,Member, IEEE, Christophe Giraud-Audine,Member, IEEE, and

Specific centered finite-difference schemes The 11-point centered optimized finite difference scheme of Bogey and Bailly [29] is used for approximating spatial derivatives at the

Workshop on Advances in the Analysis and Design of Composite Structures A FULLCOMP Training and Networking Event 2 May 2017, Salone d’Onore – Castello del Valentino - Torino H2020

For the action "Optimize the whole product to minimize releases during distribution phase", two structuring of the problem have been proposed Table 2: In the first case, the

Experimental study of bubble sweep-down in wave and current circulating tank: Part I — Experimental set-up and observed phenomena Sylvain Delacroixa, Grégory Germaina,n, Benoît