• Aucun résultat trouvé

Cerium-copper oxides prepared by solution combustion synthesis for total oxidation reactions: From powder catalysts to structured reactors

N/A
N/A
Protected

Academic year: 2021

Partager "Cerium-copper oxides prepared by solution combustion synthesis for total oxidation reactions: From powder catalysts to structured reactors"

Copied!
1
0
0

Texte intégral

(1)

Cerium-copper oxides prepared by solution combustion

synthesis for total oxidation reactions: From powder catalysts

to structured reactors

Authors

Marco Piumetti, Samir Bensaid, Tahrizi Andana, Nunzio Russo, Raffaele Pirone, Debora Fino

Publication date

2017/5/15

Journal

Applied Catalysis B: Environmental

Volume 205 Pages 455-468 Publisher Elsevier Description

A set of cerium-copper oxide catalysts with various Ce/Cu contents was synthesized using the solution combustion synthesis (SCS) technique. Catalytic activities of the prepared materials were tested for the CO oxidation, total oxidation of ethene and soot combustion. As a whole, the best performances in terms of both CO oxidation and ethene total oxidation were achieved for the binary oxide catalysts having Ce/Cu ratio ranging from 0.67 to 1.5. It has been observed that catalysts with CuOx clusters interacting with CeO2 are particularly

effective for both the oxidation reactions. This confirms that CeOx and CuOx domains may

cooperate synergistically, leading to higher oxidation activity because of the easier surface reducibility and more abundant structural defects (oxygen vacancies). On the other hand, the soot combustion activity increases as a function of the Ce-content up to 95 at.%. Indeed, the best soot …

Références

Documents relatifs

So we try understanding the adsorption process on both contact 2.4-dinitrophénol( DNP) surfaces of kaolinite (octahedral and tetrahedral) using ab initio calculations

Key words: Solar radiation pressure – Space debris – MEGNO – Detection of chaos – Long-term evolution – Geosynchronous orbit – High area-to-mass ratios –..

None of these designs have been successfully implemented in experiment and all would require small electron beam radii with large currents and significantly larger

The pillared clays were then used as a Fenton-type heterogeneous catalyst for the heterogeneous sono-Fenton process for the oxidation of methyl parathion in water. The catalytic

Generally, the oversaturation is affected by the concentration of surfactants through the chemical potential as described above. Higher concentration of the surfactant

ĂƚĂůLJƐƚƐŐƌĂĨƚĞĚŽŶƚŽĞůĞĐƚƌŽƐƉƵŶƉŽůLJŵĞƌŝĐŵĞŵďƌĂŶĞƐ  ϳϴ ƐŽůƵƚŝŽŶ͘ŽŵƉŽƐŝƚĞŵĞŵďƌĂŶĞƐǁĞƌĞŝŶƚƌŽĚƵĐĞĚŝŶƚŚĞƐŽůƵƚŝŽŶĂƐƐŵĂůůƐƋƵĂƌĞƐŚĂǀŝŶŐĂǀĞƌĂŐĞ ƐŝnjĞ ŽĨ

Using the range- finder we determined height through triangulation by measuring the horizontal distance to the object and the angles of inclination from the horizontal plane to the

Near the excitation threshold of a core level the X-ray yield increases abruptly due to the creation and radiative decay of a core hole (within this paper