• Aucun résultat trouvé

Comparison between ultrathin films of YSZ deposited at the solid oxide fuel cell cathode/electrolyte interface by atomic layer deposition, dip-coating or sputtering

N/A
N/A
Protected

Academic year: 2021

Partager "Comparison between ultrathin films of YSZ deposited at the solid oxide fuel cell cathode/electrolyte interface by atomic layer deposition, dip-coating or sputtering"

Copied!
14
0
0

Texte intégral

(1)

To link to this article : DOI:10.2174/1876973X01002010087 URL : http://dx.doi.org/10.2174/1876973X01002010087

To cite this version : Benamira, Messaoud and Ringuede, Armelle and Cassir, Michel and Horwat, David and Pierson, Jean-François andLenormand,

Pascal and Ansart, Florence and Bassat, Jean-Marc and Fullenwarth,

Julien. Comparison between ultrathin films of YSZ deposited at the solid oxide fuel cell cathode/electrolyte interface by atomic layer deposition, dip-coating or sputtering. (2009) Open Fuels and Energy Science Journal, vol. 2 (n° 1). pp. 87-99. ISSN 1876-973X

Open Archive TOULOUSE Archive Ouverte (OATAO)

OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible.

This is an author-deposited version published in : http://oatao.univ-toulouse.fr/ Eprints ID : 8959

Any correspondance concerning this service should be sent to the repository administrator: staff-oatao@listes-diff.inp-toulouse.fr

(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)

Références

Documents relatifs

In this work, we present a comparative study of optimized AZO electrodes deposited by Atomic Layer Deposition (ALD) with commercial ITO in terms of electrical, optical and structural

This paper conveys three important findings: (i) the va- lence band offset for Tm 2 O 3 /Ge of 3.05 6 0.2 eV, deter- mined by Kraut’s method 29 using a single sample

As a result, since the algorithmic complexity of the determination of the roots increases if the roots are complex, we can say that the algorithmic

Jordan Bouaziz, Bertrand Vilquin, Pedro Rojo Romeo, Nicolas Baboux, Bruno Masenelli.. To cite

Chemical Vapor Deposition, in the field of low temperature fuel cell, is mainly used for obtaining nanostructured carbon (possibly porous) thin films as a potential

Comparison between ultrathin films of YSZ deposited at the solid oxide fuel cell cathode/electrolyte in- terface by atomic layer deposition, dip-coating or sputtering. Open Fuels

«Property variations of direct-current reactive magnetron sputtered copper oxide thin films deposited at different oxygen partial pressures», Thin Solid Films Vol. Wang, et

In the present work, the silicon nanowires produced by gold-assisted chemical etching in combination with nanosphere lithography followed by ALD-based coating with ZnO layer are