Science Arts & Métiers (SAM)

Laurent LANGLOIS, Régis BIGOT, Saïd ETTAQI - Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process - 2008. Any correspondence

EXPERIMENTING THE INTERACTION EFFECT BETWEEN A PHYSICAL AND A HUMAN-CONTROLLED VIRTUAL ACTOR IN THEATRICAL PERFORMANCES Anastasiia Ternova Université Paris 8

Sections 3.1.1, 3.1.2 and 3.1.3 deal withthe injection of the investigated standard yield stress fluid through the different porous media, in order to assess the ef-

Keywords: epoxy matrix, thermal oxidation, analytical kinetic model, chain scissions, glass transition temperature, lifetime prediction Edited by: Francesca Lionetto, University of

As reported in the literature [16], the morphology of the coating is directly influenced by the surface conditions of the substrate, notably roughness or irregularities, suggesting that

Tool wear processes in low frequency vibration assisted drilling of CFRP/ Ti6Al4V stacks with forced air-cooling Chao Lia, Jinyang Xua,⁎, Ming Chena, Qinglong Ana, Mohamed El

E-mail address: [email protected] e-ISSN: 2170-127X, Research Paper A Study of Cr/CrN and Cr/CrN/CrAlN Multilayer Coatings for Permanent Mold Castings of Aluminum

According to the applied tensile tests on the printed specimens at the stated different print speed values, the tensile strength values of 65 ± 0.5, 55 ± 0.6, and 63 ± 1.3 were obtained