Science Arts & Métiers (SAM)

Laurent LANGLOIS, Régis BIGOT, Saïd ETTAQI - Cobalt-based superalloy layers deposited on X38CrMoV5 steel base metal by explosion cladding process - 2008. Any correspondence

Iconography-based 3D reconstruction section 4 • 3D surveying of the current state of the building • Spatial and temporal referencing of iconography sources • Image-based

CONCLUSION The Proper Generalized Decomposition method associated with the Discrete Empirical Interpolation Method has been applied to solve a 3D non-linear FE magnetostatic problem

Since at high stress amplitudes, the thermal and mechanical properties of the material can be changed because of the high temperature increase, this formulation was used to measure the

Comparison between the BSD obtained with Network Modelling and the size distributions of characteristic pore dimensions provided by YSM and MIP: a matrix of circular solid cylinders b

Sections 3.1.1, 3.1.2 and 3.1.3 deal withthe injection of the investigated standard yield stress fluid through the different porous media, in order to assess the ef-

As reported in the literature [16], the morphology of the coating is directly influenced by the surface conditions of the substrate, notably roughness or irregularities, suggesting that

Tool wear processes in low frequency vibration assisted drilling of CFRP/ Ti6Al4V stacks with forced air-cooling Chao Lia, Jinyang Xua,⁎, Ming Chena, Qinglong Ana, Mohamed El