• Aucun résultat trouvé

Natural Element Method for the Simulation of Structures and Processes

N/A
N/A
Protected

Academic year: 2021

Partager "Natural Element Method for the Simulation of Structures and Processes"

Copied!
2
0
0

Texte intégral

(1)

Science Arts & Métiers (SAM)

is an open access repository that collects the work of Arts et Métiers Institute of Technology researchers and makes it freely available over the web where possible.

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/18738

To cite this version :

Francisco CHINESTA, Serge CESCOTTO, Elías CUETO, Philippe LORONG - Natural Element Method for the Simulation of Structures and Processes - 2013

Any correspondence concerning this service should be sent to the repository Administrator : archiveouverte@ensam.eu

(2)

Natural Element Method for the Simulation

of Structures and Processes

Francisco Chinesta, Serge Cescotto, Elias Cueto, Philippe Lorong

Description

Computational mechanics is the discipline concerned with the use of computational methods to study phenomena governed by the principles of mechanics. Before the emergence of computational science (also called scientific computing) as a "third way" besides theoretical and experimental sciences, computational mechanics was widely considered to be a sub-discipline of applied mechanics. It is now considered to be a sub-sub-discipline within computational science.

This book presents a recent state of the art on the foundations and applications of the meshless natural element method in computational mechanics, including structural mechanics and material forming processes involving solids and Newtonian and non-Newtonian fluids. 4th cover, excerpt from publisher's website.

Références

Documents relatifs

5 shows the mechanical deformations of the actuation unit when a dc voltage is applied. One point of investigation was the nonlinear dynamic response of the micropump. The pump

In the following section, we present all the components of a particular discrete element method based on non-smooth contact dynamics NSCD: space discretization of the bodies,

Le Tableau 4.8 résume les mesures de rugosité du silicium dans les pixels après gravure, nous remarquons que la rugosité post-gravure est 3 fois plus élevée que la référence

La quête, dans ce roman de formation, est bien af- faire de perspective, de point de vue. Balzen n’a pas écrit, ou quelques lettres seulement, le narrateur n’in-.. terroge pas un

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Comparativement à d autres études, le maximum d activité amylasique est observé au cours de la phase d accélération de la croissance ; 78 heures pour la souche Lipomyces sp

Conception du réseau d’adaptation d’impédance Comme il a été mentionné dans le premier chapitre, le transfert maximal de la puissance RF vers le circuit de conversion

Les configurations d’activité, un niveau d’organisation de l’activité en classe : un exemple en lecture au cycle 2 de l’école primaire Philippe Veyrunes.. To cite this