Science Arts & Mйtiers (SAM)

For the modeling of single reed wind instruments four objects are distinguished: the mouthpiece with reed, the tube, the tone hole with possible closing by a finger or a key, and

A procedure based on genetic algorithms coupled to classical optimisation methods is proposed to identify the parameters of the models upon experimental data given in the

This is an author-deposited version published in: https://sam.ensam.eu Handle ID: .http://hdl.handle.net/10985/16978 To cite this version : Giulia BERTOLINO, Marco MONTEMURRO, Giorgio

Forearms Cyclic lever Arms Collective lever Figure 8.Positionning of the pilot in the cabin Aeroelastic rotorcraft and rotor actuation system The rotorcraft model is based on

3.4 3D LIVE UX and QoE Model Within 3D LIVE, the Rational and Experiential Model represents the Immersive User Experience IUX as supporting instantaneously occurring experience while

The localization method is based on the following physical phenomenon: a finger contact modifies the energy distribution of acoustic wave in a solid; these variations depend on the wave

- In welding configuration, when the incident beam is Gaussian, the conduction-to-keyhole transition occurs when the deflection of liquid/gas interface reaches a threshold depth, equals

Also true for the steel SNC that the hardness improves after plasma nitriding at a higher temperature of 500°C for 10 h and the present study has shown the significant improvement of