Science Arts & Mйtiers (SAM)

11.Multiscale surface roughness spectrums drawn at each cutting depth for different cutting speeds at the cutting edge radius rε= 27μm.. 12.Multiscale contribution rate of each process

Forearms Cyclic lever Arms Collective lever Figure 8.Positionning of the pilot in the cabin Aeroelastic rotorcraft and rotor actuation system The rotorcraft model is based on

EXPERIMENTING THE INTERACTION EFFECT BETWEEN A PHYSICAL AND A HUMAN-CONTROLLED VIRTUAL ACTOR IN THEATRICAL PERFORMANCES Anastasiia Ternova Université Paris 8

Specific centered finite-difference schemes The 11-point centered optimized finite difference scheme of Bogey and Bailly [29] is used for approximating spatial derivatives at the

This simulation will allow the user to perform the endotracheal intubation procedure with the assistance of a laryngoscope and other necessary steps in a realistic virtual reality

coatings and the substrate (X38CrMoV5). b) Microstructure of steel substrate close to the interface interface. c) Microstructure of Co-based alloy Coating close to the interface.

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..

Bimaterial sheet obtained by explosive cladding 40 mm 10 mm 2 perpendicular cross sections Hardness measurments Micrographies of the surface and cross sections ……… … ..