Nanostructured CuO directly grown on copper electrochemically: synthesis and characterization

Finally, the zone diagram will be applied to predict: (i) the possible sequences of limiting behaviors of the electrochemical model at increasing values of the

The solubiliÿ product of Cu(OH) 2 , has probably been determined with the saturated solutions obtained from copper salt solutions in presence of hydroxide ions. In these

In the current study, modified CPEs incorporating multi-walled carbon nanotubes ((G- MWCNT)-CPE) were applied for the trace detection and quantification of

This is the reason we concentrate to study proton exchange membrane fuel cells (PEMFCs) because their specific characteristics like zero pollution, high power density, low

To show the interest of the method compared to linear sweep anodic stripping voltammetry, an analysis of a lead solution was carried out under the same electrodeposition conditions

From cyclic voltamperometry experiments, the composite activity for the nitrate electroreduction reaction was evaluated and the peak of nitrate reduction is found to vary linearly

Electrochemical methods, especially the chemically modified electrodes (CMEs) have utilized extensively, due to several advantages in comparison with other methods, such

The Cu foil was modified electrochemically by Cyclic voltammetry (CVs) a three electrode cell with Cu foam working electrode, platinum foil counter electrode and saturated