• Aucun résultat trouvé

ELECTROCATALYTIC REDUCTION OF NITRITE IN WATER AT CuO/Cu ELECTRODE Abderrazak.HAMAM

N/A
N/A
Protected

Academic year: 2021

Partager "ELECTROCATALYTIC REDUCTION OF NITRITE IN WATER AT CuO/Cu ELECTRODE Abderrazak.HAMAM"

Copied!
1
0
0

Texte intégral

(1)

ELECTROCATALYTIC REDUCTION OF NITRITE IN WATER AT CuO/Cu ELECTRODE

Abderrazak.HAMAM1,2,*,Dehbia.OUKIL2,Toufik.CHOUCHANE1,Laid.MAKHLOUFI2

1Welding and NDT Research Center CSC-Algeria, Siderurgy and Metallurgy Research Unit URASM-CSC B.P 196.23000 Annaba, Algeria

2LECVE Laboratory, Chemical Engineering Department, Faculty of Technology, University of Bejaia, 06000, Bejaia, Algeria.

*Corresponding author: e-mail: [email protected]

Abstract

Nitrite plays an important role in environment and life process. As an alarming pollutant to the environment and human health, various techniques have been developed to determine nitrite. Electrochemical methods, especially the chemically modified electrodes (CMEs) have utilized extensively, due to several advantages in comparison with other methods, such as quick response, high sensitivity, low detection limit and simple use.Nanostructured CuO was directly grown on copper foam by cyclic voltammetry method, The electrocatalytic reduction of nitrite at CuO/Cu has been investigated using 0.5 M H2SO4 solution.The proposed method was successfully applied in the detection of nitrite in real water samples and obtained satisfactory results.

Keywords:

Cupper substrate, Cupper oxide, nitrite reduction, Electrocatalyst.

Références

Documents relatifs

Gael de Leener, Ferdinand Evoung-Evoung, Angelique Lascaux, Jérémy Mertens, Ana Gabriela Porras-Gutierrez, Nicolas Le Poul, Corinne Lagrost,. Diana Over, Yann Leroux, François

À moins d’une entente, le syndicat menace de déclencher la grève à compter de lundi prochain.. La patinoire était recouverte d’une trentaine de centimètres

In other algo- rithms (Prentice et al., 2011; Marre et al., 2012), only the spike shape is used to define the best matching template, and then the algorithm decides whether the

8 : (a) HCOOH current efficiency plotted against the charge passed on GDE-In/C and In foil at - 1.65 V without pre-electrolysis of the electrolyte and (b) HCOOH production

Electrochemical methods, especially the chemically modified electrodes (CMEs) have utilized extensively, due to several advantages in comparison with other methods, such as

The catalyst was immobilized on a graphite felt electrode (1 cm 3 ) by incorporation into a Nafion ® film. A number of studies have demonstrated that the perfluorinated ion-exchange

Although, metallic nanocatalysts were coated on diazonium-modified electrode materials in a variety of innovative strategies 3,24,30,31 , to the very best of our knowledge