• Aucun résultat trouvé

Document en libre accès dans PolyPublie : Référence: : Alexandre Labelle et Jean-Marc Frayret Date: 2018 Type: : Agent-based model for end-of-life product flow analysis Auteurs: Titre:

N/A
N/A
Protected

Academic year: 2021

Partager "Document en libre accès dans PolyPublie : Référence: : Alexandre Labelle et Jean-Marc Frayret Date: 2018 Type: : Agent-based model for end-of-life product flow analysis Auteurs: Titre:"

Copied!
2
0
0

Texte intégral

(1)

Titre:

Title: Agent-based model for end-of-life product flow analysis

Auteurs:

Authors: Alexandre Labelle et Jean-Marc Frayret

Date: 2018

Type:

Article de revue / Journal article

Référence:

Citation: Labelle, A. & Frayret, J.-M. (2018). Agent-based model for end-of-life product flow analysis. Resources, 8(1). doi:10.3390/resources8010023

Document en libre accès dans PolyPublie

Open Access document in PolyPublie

URL de PolyPublie:

PolyPublie URL: https://publications.polymtl.ca/3563/ Version: Erratum Révisé par les pairs / Refereed

Conditions d’utilisation:

Terms of Use: CC BY

Document publié chez l’éditeur officiel

Document issued by the official publisher

Titre de la revue:

Journal Title: Resources (vol. 8, no 1) Maison d’édition:

Publisher: MDPI URL officiel:

Official URL: https://doi.org/10.3390/resources8010023 Mention légale:

Legal notice:

Ce fichier a été téléchargé à partir de PolyPublie, le dépôt institutionnel de Polytechnique Montréal

This file has been downloaded from PolyPublie, the institutional repository of Polytechnique Montréal

(2)

resources

Erratum

Erratum: Labelle, A., et al. Agent-Based Model for

End-of-Life Product Flow Analysis, Resources 2018,

7, 42

Alexandre Labelle and Jean-Marc Frayret *

Département de Mathématiques et Génie Industriel, École Polytechnique de Montréal, 2900 Boulevard Edouard-Montpetit, Montréal, QC H3T 1J4, Canada; [email protected]

* Correspondence: [email protected]; Tel.: +1-514-340-4711 (ext. 4930)

Received: 12 January 2019; Accepted: 18 January 2019; Published: 21 January 2019 

The authors wish to make the following corrections to this paper [1]: On page 11, there are six “(%)” in the table headers that should be deleted.

The authors would like to apologize for any inconvenience caused to the readers by this change. The change does not affect the scientific results. The manuscript will be updated and the original will remain online on the article’s webpage.

Reference

1. Labelle, A.; Frayret, J.-M. Agent-Based Model for End-of-Life Product Flow Analysis. Resources 2018, 7, 42.

[CrossRef]

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Références

Documents relatifs