Modeling and Simulation of Workflow Processes Using Multi-level Petri Nets

The high level abstract models show typical failure scenarios and the combined states of the infrastructures as resulting from their interdependencies.. The eval- uation of

During the logic high level, a Joule heating is applied onto the sensing resistor of the bolometer equivalent to approximately 20% of full-scale optical input power, and

Unit´e de recherche INRIA Rennes, Irisa, Campus universitaire de Beaulieu, 35042 RENNES Cedex Unit´e de recherche INRIA Rhˆone-Alpes, 655, avenue de l’Europe, 38330 MONTBONNOT ST

Besides this biological case study, the contribution of the paper is also on a more abstract level. Indeed, our approach overpasses the pure application con- text and allows a

Figure 14 shows traffic flow from which it can be seen that arrival (parking) delay of some aircraft (yellow color) is caused by departure delay of others (red color; caused

Let us take a criterion place (i.e, System) from the car crash APN model and apply our proposed concerned slicing algorithm to find which transitions and places can contribute tokens

This work consists of a modeling and control of a new power converter topology DC/DC, an algorithm for con- trolling the switches of the chopper using Petri nets has been proposed

For the sake of simplification, in the sequel the ex- pression of the value of both localities will refer only to the set of transitions considered in the op- erators M IN or M