• Aucun résultat trouvé

TWO-STEP ELECTROLESS SYNTHESIS OFA COPPER/SILVERCOMPOSITE FILM FORELECTROCATALYTIC OXIDATION OFFORMALDEHYDE

N/A
N/A
Protected

Academic year: 2021

Partager "TWO-STEP ELECTROLESS SYNTHESIS OFA COPPER/SILVERCOMPOSITE FILM FORELECTROCATALYTIC OXIDATION OFFORMALDEHYDE"

Copied!
1
0
0

Texte intégral

(1)

5th TUNISIAN CRYSTALLOGRAPHIC MEETING –TCM5 2016

TWO-STEP ELECTROLESS SYNTHESIS OF A COPPER/SILVERCOMPOSITE FILM FOR

ELECTROCATALYTIC OXIDATION OF FORMALDEHYDE

Charif DEHCHAR, Rochdi KHERRAT

Abstract : In this work, we report a two-step electroless plating process for preparing a copper/silver composite film on a Resin Epoxy (RE) substrate. First, silver film was deposited on RE substrate from a silvering bath. Then, copper was deposited on silver film at 95 °C from a separate solution containing copper ions and formaldehyde as reducing agent. The electrochemical reactivity of the prepared copper/silver composites was investigated towards the electrochemical oxidation of formaldehyde. Scanning electron microscopy of the composites showed a porous microstructure with uniform surface morphology. The presence of silver and copper onto the RE surface was confirmed by energy dispersive X-ray analysis. The formaldehyde oxidation peak on the copper/silver electrode is obtained at -0.3 V/SCE. The electrode showed a significant electrocatalytic activity with good repeatability and stable electrochemical response.

Keywords : copper, Electroless deposition, Formaldehyde, Silver, thin film

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

When Fe was deposited on the Cu tip kept at -20 K, the obtained FIM image consisted of randomly distributed bright spots. By changing the tip temperature during the Fe

Fig 3 represents cyclic voltammogram recorded for the copper/silver modified electrode in 0.01 M, pH 7.0 phosphate buffer solution in presence and absence of formaldehyde.. In

Abstract: In this work, we studied the electrodeposition of copper (Cu) microparticles on polypyrrole (PPy) ?lms using cyclic voltammetry and chronoamperometry techniques?. The

Abstract: In this paper, we investigated the characteristics of a structured copper (Cu) ?lm deposited on the surface of an insulating epoxy glass (EG) substrate via a

A sharp step of fi lm parameters such as e ff ective magnetic fi eld or saturation magnetization results in partial re fl ection of a spin wave incident on the step.. There is a jump

See the supplementary material for the Energy Dispersive X-ray spectrum of the layer between the Si substrate and the deposited layer of BN as well as the bright field

La relation pédagogique est indéfectiblement sous-tendue par un rapport de séduction réciproque entre l’adulte et les enfants, et l’on ne comprend rien aux

More specifically, we emphasize that the TomoPIV volume reconstruction task can be addressed by resorting to the powerful “Alternating Direction Method of Multipliers” (ADMM)