ELABORATION et CHARACTERISATION desCOUCHES MINCES DES OYDES DECUIVRES (CuO)

A copper nitrate was used and dissolved in two different solutions (Water, Methanol) S1 and S2 respectively in order to obtain an equal concentration;CS1, S2= 0.5M.The spray

The X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-vis spectrophotometry were used to determinate the structural, morphological and optical properties

Abstract : In this work, a copper oxide thin films were deposed by a simple and inexpensive technique (spraypyrolysis) on ordinary glass substrates at a fixed temperature T=500°C..

In this work, a copper oxide thin films were deposed by a simple and inexpensive technique (spray pyrolysis) on ordinary glass substrates at a fixed temperature T=500°C. and

Abstract: Tin Sulfide (SnS) thin films were deposited by ultrasonic spray pyrolysis technique, on glass substrate heated at 280 °C, with different deposition times.. The used

The aim of our work is the development and characterization of nickel oxide thin films deposited by the technique of spray pyrolysis on glass substrates.. This

The structural, Zinc oxide (ZnO) and ZnxCd1-xO thin films were deposited using a low cost spray pyrolysis morphological, and optical properties of ZnO and Cd:ZnO

Abstract : An unbalanced radiofrequency magnetron sputtering, at low pressure argon-oxygen gas mixture, was used to elaborate copper oxide films.. Analyses of the deposited layers