Elaboration and Characterization of CopperOxide (CuO) Thin Films Deposited bythe SprayPyrolysis Method

A copper nitrate was used and dissolved in two different solutions (Water, Methanol) S1 and S2 respectively in order to obtain an equal concentration;CS1, S2= 0.5M.The spray

The X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-vis spectrophotometry were used to determinate the structural, morphological and optical properties

In this work, a copper oxide thin films were deposed by a simple and inexpensive technique (spray pyrolysis) on ordinary glass substrates at a fixed temperature T=500°C. and

The aim of this work was to determine adequate parameters for cathodic electrolytic deposition, on TA6V substrate, of cerium hydroxide films from mixed

The structural, optical and electrical, properties of the films were determined using X-ray diffraction, UV visible transmittance and Hall Effect measurements respectively..

In the present work, we studied the growth of ZnO thin films on glass substrate by Sol-gel method using zinc acetate dehydrate precursor and undergo optical

Abstract : An unbalanced radiofrequency magnetron sputtering, at low pressure argon-oxygen gas mixture, was used to elaborate copper oxide films.. Analyses of the deposited layers

«Property variations of direct-current reactive magnetron sputtered copper oxide thin films deposited at different oxygen partial pressures», Thin Solid Films Vol. Wang, et