Laser polishing of additive laser manufacturing surfaces

To this aim, I have generated a mouse line named mTOR MKOKI which is defective in endogenous muscle mTOR (mTOR MKO), while expressing a FLAG-tagged muscle-specific

In spite of that, since most of the synaptic activity received either in vitro or in vivo appears to be uncorrelated to any specific stimulus, a yet unsolved question is what

Alors, satisfaite, elle se relève avec précaution, tout en fixant comme une démente, l'objet de sa convoitise, tant et si bien qu'elle oublie de cacher le devant de son manteau!.

in the case of selective laser melting, the powder layer is deposited on top of the substrate then it is melted using the high power laser.. 24 A SLM process is actually

A brief comparison between EDS analysis of the samples before and after the LP process (figures 4-b and 5-b), shows a substantial increase of oxygen content after the LP

Using these synthetic reflection data, we examined the effects of fracture-induced anisotropy and fracture density heterogeneity on the wave reflections, and their

In this work, we study the cementation reaction of copper by zinc in acid sulphate media in the presence of nettle plant extract (Urtica dioica L.). The effect of some

Les propriétés de l'interface entre granules d'amidon et réseau protéique ont ensuite été recherchées, in situ, au sein des grains à l’aide de lignées quasi-isogéniques pour