• Aucun résultat trouvé

On-chip broadband laser source using chalcogenide glass planar waveguide

N/A
N/A
Protected

Academic year: 2021

Partager "On-chip broadband laser source using chalcogenide glass planar waveguide"

Copied!
81
0
0

Texte intégral

Figure

Fig II.3: Micro bending
Table  I.1|  the  different  between  Electronic  integrated  circuits  and  photonic integrated circuits
Fig I.2: Photograph of  SOI wafer with various photonic components and circuits [19].
Fig  I.3:  Typical  process  stack  representing  a  silicon  photonics  platform  with  grating   couplers,  germanium  photodetectors,  waveguides,  modulators  and  MOSFETs,  on  a   silicon-on-insulator wafer [17, 19]
+7

Références

Documents relatifs

Thus, Geometry DB as an information system has to provide the following functionality: store the modules of CBM, load the geometry modules for setup construction, construct

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

For the Conseil, a more inclusive education system is one that allows each and every individual—regardless of interests, aspirations and potential—to access the highest possible

amplement (voir section précédente), par les impressions de voir, d’entendre, de toucher, etc. - d’avoir conscience de -, impressions qui ont leur support objectif dans les

For this purpose, an original experi- ment was developed to measure the thermal field at the surface of an AsSe glass specimen submitted to cyclic mechanical loading.. The

at a time when this limitation was not yet in application and compulsory.” Although the formal/analytical grammar of the constitutional text seems to place it

In this model, CKI δ acts on the adjacent serine residues when Ser662 is phosphorylated (blue path in Fig. 1), but CKI δ also acts independently of Ser662 phosphory- lation

Recommends to the General Assembly to revise the Operational Directives for the implementation of the Convention in order to revise the accreditation process