• Aucun résultat trouvé

Monitoring of Stator windings Faults inInduction Machine Using Fuzzy Logic

N/A
N/A
Protected

Academic year: 2021

Partager "Monitoring of Stator windings Faults inInduction Machine Using Fuzzy Logic"

Copied!
1
0
0

Texte intégral

(1)

JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING

Volume 9, Issue 2, 2016, Pages 49-54

Monitoring of Stator windings Faults in Induction Machine Using Fuzzy Logic

Merabet hichem, DRICI. Djalel, AOUABDI. Salim

Abstract: the monitoring and fault detection of theinduction machines drives becomes more and moreimportant. This made necessary the monitoringfunction condition of these machines for improved anexploitation of the industrial processessing. The aim ofthis task is the proposal of a monitoring strategy basedon the fuzzy logic inference system, that informs usabout the healthy function and stator fault condition,especially the open circuit and short-circuit inter-turnsof the stator windings. The principle adopted for thestrategy suggested is based on monitoring of theaverage root mean square value of stator current(RMS).Theoretical analysis, simulations results arepresentes to validate the effectiveness of the proposesdmethod.

Keywords : Induction machine, Monitoring, diagnosis, Detection, Fuzzy logic, RMS

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

In this paper, we present the monitoring strategy of short-circuit fault between turns of the stator windings and open stator phases in doubly-fed induction generator by fuzzy

In the second part of this work we have assembled feasibility to monitoring and detecting the stator short-circuit fault between turns in a DFIG and open stator phases by

Agarawal , “ Fault Diagnosis of Three Phase Induction Motor using Fuzzy Logic Controller and Sequence Analyzer”, MIT International Journal of Electrical and

Section II presents demodulation techniques used for stator currents processing and section III focuses on the performance of these techniques on simulated data

A similar situation is found in the plurivaluationistic semantics for other vague predicates besides our example of tall: typically, the class of admissible fuzzy models P can

In automotive industry, as the paint quality can achieve a high level now, the appearance measurement is mainly emphasized on the parameters of specular gloss, orange

The data processing module based on the fuzzy inference with help the given by experts the membership functions and the rule base draws the conclusions on the

The following noise filtration methods were analyzed: arithme- tic averaging filter, geometric averaging filter, median filtering, adaptive medi- an filtration, Gaussian filtration