• Aucun résultat trouvé

On-Line Monitoring and Classification of Statorwindings Faults inInduction Machine UsingFuzzy Logic and ANFIS Approach

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "On-Line Monitoring and Classification of Statorwindings Faults inInduction Machine UsingFuzzy Logic and ANFIS Approach"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

Proceedings of the International Conference on Recent Advances in Electrical Systems,

Volume 1, Issue 1, 2016, Pages 187-192

On-Line Monitoring and Classification of Stator windings Faults inInduction Machine Using

Fuzzy Logic and ANFIS Approach

Merabet. Hichem, Bahi. Tahar, DRICI. Djalel, Bedoud. Khouloud, Boudiaf. Adel

Abstract: the induction machines drives becomes moreand more important used in many industrial applications.Their attractiveness is largely due to their simplicity,ruggedness and low cost manufacture, easy maint00enance,high power efficiency and high reliability, are susceptible tovarious types of electrical and/or mechanical faults that canlead to unexpected motor failure and consequently impulsivedowntime. This made necessary the monitoring functioncondition of these machines types for improved anexploitation of the industrial processes. The aim of this taskis the proposal of a monitoring strategy based on the fuzzylogic inference system (FIS) and the neuro-fuzzy inferencesystem (ANFIS) for monitoring and classification ofelectrical faults types, especially the open phase and interturnsshort-circuit in the stator windings. The principleadopted for the strategy suggested is based on monitoring ofthe average root mean square value of stator current (RMS).Mathematical models and simulations results are presentedto validate the efficiency of this approach.

Keywords : Monitoring, classification, Fis, INFIS, RMS

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.87 KB )

Documents relatifs

Monitoring and Security for the Internet of Things

These RPL-based networks may be exposed to a large variety of attacks [2], but the deployment of security mechanisms may also be quite expensive in terms of resources.. In that

Diagnosis and classification using ANFIS approach ofstator and rotor faults in induction machine

In this paper, we proposed a reliable approach fordiagnosis and detection of stator short-circuit windings and rotor broken barsfaults in induction motor under varying load

Diagnosis and classification using ANFIS approach of stator and rotor faults in induction machine Hichem Merabet*

In this paper, we proposed a reliable approach for diagnosis and detection of stator short-circuit windings and rotor broken bars faults in induction motor under varying

On-Line Monitoringand Classification of StatorwindingsFaultsin Induction MachineUsing FuzzyLogicand ANFIS Approach

In the second part of this work we have assembled feasibility to monitoring and classification of open stator phase and inter-turns short-circuit fault inter

Monitoring of Stator windings Faults inInduction Machine Using Fuzzy Logic

The aim ofthis task is the proposal of a monitoring strategy basedon the fuzzy logic inference system, that informs usabout the healthy function and stator fault

Monitoring of Stator windings Faults in Induction Machine Using Fuzzy Logic

The aim of this task is the proposal of a monitoring strategy based on the fuzzy logic inference system, that informs us about the healthy function and stator fault

Condition Monitoring and Fault Detection inWind Turbine Based on DFIG by the FuzzyLogic

In this paper, we present the monitoring strategy of short-circuit fault between turns of the stator windings and open stator phases in doubly-fed induction generator by fuzzy

Monitoring and Fault detection of the Statorshort circuit fault in induction motor based onthe FuzzyLogic approach

The principle adopted for the strategysuggested is based on monitoring of the average root meansquare (RMS) value of the stator current, which will beuseful as input data with the