• Aucun résultat trouvé

Amorphous Metallic Glass as New High Power and Energy Density Anodes For Lithium Ion Rechargeable Batteries

N/A
N/A
Protected

Academic year: 2021

Partager "Amorphous Metallic Glass as New High Power and Energy Density Anodes For Lithium Ion Rechargeable Batteries"

Copied!
5
0
0

Texte intégral

Loading

Figure

Figure 1. Principle of lithium ion battery - the battery is in discharge state
Table 1. Crystalline phases in the as-spun amorphous metallic glass Al 80 Ni 10 La 10 Al 80 Cu 10 La 10 Al 88 Ni 9 Y 3 Phase Present La 3 Al 11 in amorphousmatrix Partially amorphousonly Nano-size_-Al in amorphous matrix 350 400 450 500 550 600 650 700 750
Figure 5. Lithium insertion voltage for crystalline aluminum and glassy Al 80 Cu 10 La 10

Références

Documents relatifs

We demonstrated that survival rate, mean body weight and biomass can be improved in rainbow trout (Oncorhynchus mykiss) after a single generation of selection for the ability to

For example, placement of the operating point in Region 1, where forward action dom- inates, produces a minimum requirement for the output filter by maintaining

As a consequence, it is confirmed that the deposition of niobium pentoxide is achievable onto graphitized carbon cloth, but as the deposit thickness (and therefore

The new solution procedure for overgrowth of CdSe nanocrystals with ZnSe using organometallic precursors, presented here, yields high quality CdSe/ZnSe particles

Chez les champignons, les éléments Gypsy sont également plus présents au sein des génomes que les Copia, qui ont un nombre de copies assez faible au sein des génomes (entre 0

L'important livre de Linda Goddard, spécialiste de Gauguin et auteure déjà très remarquée d'un article sur les rapports entre poésie et journalisme chez Mallarmé, s'inscrit dans

This electrode delivered a very stable discharge capacity of 150 mAh g -1 over 500 cycles that have been tested at 5C rate, despite the fact that it was rutile TiO 2 , the phase

The commercial use of lithium metal batteries was delayed because of dendrite formation on the surface of the lithium electrode, and the difficulty finding a suitable