Description of the solid method of BaTiO3

Description of the solid method of BaTiO

ceramics elaborations

Guessoum Mounia^1,2,*, Boukazouha Faiza¹and Sedda Kamel¹

1. Research Center in Industrial Technologies CRTI.P.O.Box 64, Cheraga 16014 Algiers, Algeria 2. Faculty of Physics, University of Science and Technology Houari Boumediene. BP 32 Bab Ezzouar,

16111 - Algiers, Algeria

* [email protected]

Abstract

There are two major methods of the barium titanate ceramic BaTiO3 elaboration, the solid and the liquid methods (Hydrothermal, sol-gel processing, and Coprecipitation) [1, 2, 3].

In this work, we present a theoretical study to describe the solid method of BaTiO3 elaboration, it is the most method used in the industry, because it is very economical, inexpensive and easier to implement.

Key words

BaTiO3 ceramic; elaborations; heat treatment; sintering; Solid-state reaction;

References:

[1]. T. AL-NABOULSI, M. BOULOS, Elaboration and characterization of barium titanate powders obtained by the mechanical activation of barium nitrate and titanate oxide, and electrical properties of the ceramics sintered by SPS. (2016) Journal of Ceramic Processing Research, vol. 17 (n° 8). pp. 870-875, (2016).

[2].K. I. OSMAN.Synthesis and characterization of BaTiO3 ferroelectric material. Thèse de Doctorat, Université du Caire, Egypte, (2011).

[3]. MEYAR MERIEM. Etude de système chimique BaTiO3-SrF2-LiF: synthèse et caractérisation. Thèse de Doctorat, Université Houari Boumediene, (2005).