• Aucun résultat trouvé

EVOLUTION OF THE MICROSTRUCTURALPARAMETERS OF COLD WORK Ti-6-Al-4VALLOY.

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "EVOLUTION OF THE MICROSTRUCTURALPARAMETERS OF COLD WORK Ti-6-Al-4VALLOY."

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

Acta Metallurgica Slovaca

Volume 23, Issue 4, 2017, Pages 313-318

EVOLUTION OF THE MICROSTRUCTURAL PARAMETERS OF COLD WORK Ti-6-Al-4V

ALLOY.

Brahim MEHDI, Nabil KHERROUBA, Soumia Doufana, Riad BADJI, Baya Alili

Abstract: AbstractThe aim of this work is to investigate cold worked Ti-6Al-4V (?+?) alloy. The alloy was examined by X-ray diffraction using Rietveld refinement method. MAUD software (Materials Analysis Using Diffraction) was used to analyze the microstructural parameters evolution (crystallite size, root mean square strain (r.m.s) and dislocation density. The Crystallite size is smaller in the ?-phase compared to the ?-phase. Microstrain and dislocation density are higher in the ?-phase than those found in the

?-phasefor the as received material. The microstructural parameters of Ti-6Al-4V alloy exhibit typical values of cold deformation state. The results show that the deformation process reducesthe crystallite size (coherent diffraction domains) from 520 to 210 ? in the ?-phase. Consequently, the r.m.s increases from 5 E-4to 32 E-4and the dislocation density increases from 2.92 E+10to 4.6 E+11m-2after 85 % thickness reduction.

Keywords : Ti-6Al-4V alloy, cold working, crystallite size, dislocation density

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.72 KB )

Documents relatifs

The Efficiency and Evolution of R&D Networks

Thus, the returns from collaborations in an efficient graph are identical for all firms (since they have the same largest real eigenvalue) but the cost is different and is

The efficiency and evolution of R&D Networks

Thus, the returns from collaborations in an efficient graph are identical for all firms (since they have the same largest real eigenvalue) but the cost is different and is

X-Ray Diffraction Evaluation of DislocationDensity and Crystallite Size in the HAZ

The analysis of the diffraction pattern profiles by the Rietveld refinement method (X-ray Diffraction Line Profile Analysis XRDLPA), allows obtaining detailed information on

X-Ray Diffraction Evaluation of Dislocation Density and Crystallite Size in the HAZ B. MAAMACHE

Based on the X-ray diffraction analysis (XRD) using Material Analysis Using Diffraction (MAUD) software, the results show an outstanding evolution of

(1)EVOLUTION OF THE MICROSTRUCTURAL PARAMETERS OF COLD WORK Ti-6- Al-4V ALLOY Brahim Mehdi1,2

MAUD software (Materials Analysis Using Diffraction) was used to analyze the microstructural parameters evolution (crystallite size, root mean square strain (r.m.s)

NEUTRON DEPOLARISATION AS A METHOD TO DETERMINE THE MAGNETIZATION, THE MEAN DOMAIN SIZE AND THE MEAN SQUARE COMPONENTS OF THE INNER MAGNETIZATION OF FERROMAGNETS

NEUTRON DEPOLARISATION AS A METHOD TO DETERMINE THE MAG- NETIZATION, THE MEAN DOMAIN SIZE AND THE MEAN SQUARE COMPONENTS OF THE INNER MAGNETIZATION OF

Analysis of the degradation in solid oxide cells operated in fuel cell and electrolysis modes : microstructural evolution and stability of the electrodes materials

148 Figure V-3: Evolution of the oxygen atom concentration in the LSCF along the electrode thickness as a function of the overpotential (illustrated for a pure LSCF electrode

Digital Image Correlation used to Analyze the Multiaxial Behavior of Rubber-like Materials

An evaluation of the displacement field obtained by digital image correlation allows us to evaluate the heterogeneous strain field observed during these tests.. We focus on