• Aucun résultat trouvé

Thermo-hydrodynamic study of the journalbearing under static load

N/A
N/A
Protected

Academic year: 2021

Partager "Thermo-hydrodynamic study of the journalbearing under static load"

Copied!
1
0
0

Texte intégral

(1)

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Volume 222, Issue 9, 2008, Pages 1801-1809

Thermo-hydrodynamic study of the journal bearing under static load

N Tala Ighil, A. Bounif, P. Maspeyrot

Abstract: A number of studies have been carried out on the hydrodynamic lubrication of journal bearings. This articleseeks to summarize this work, presenting it in the form of a flow chart. The treatment of rupture andreformation of the film fluid in the contact region, for a steady loaded circular journal bearing, areaccomplished using the Reynolds and the Jakobsson–Floberg and Olsson (JFO) boundary conditions.A flow chart taking into account the resolution of some of the hydrodynamic lubrication problems is elaborated.A computer code is carried out for solving the Reynolds equation and for calculating the most importantparameters relating to a hydrodynamic contact. The obtained results for a finite-length bearing are comparedwith those obtained from the short-bearing hypothesis. In addition, a global thermal study is carried out in orderto evaluate the effect of temperature.

Keywords : hydrodynamic bearing, static load, thermal effect, Jakobsson–Floberg and Olsson, Elrod, Reynolds

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

In Section 3, we study the steady state solution of a Euler–Bernoulli beam under a moving load, on a foundation composed of a continuous distribution of linear elastic

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

In Section 2, we prove the existence of solution to the regularized problem as a fixed point of a global operator, which consists of the composition of four operators related to

يلخادلا ققدملا موقي ءاطخلأا نع فشكلاب يف ةيرهوجلا تافلاخملاو .ريرقتلا ةيمومع معن ةصاخ 20 76.9 04 15.4 02 7.7 2.69 0.61 معن نيعب يلخادلا ققدملا ذخأي

The treatment of rupture and reformation of the film fluid in the contact region, for a steady loaded circular journal bearing, are accomplished using the Reynolds and

The presence of textures over the entire surface of the bearing does not necessarily improve the hydrodynamic characteristics (friction reduction, increased

In order to estimate the aerodynamic coefficients, required for the lifting line model, and the pressure along the section, a set of 2D simulations on a Leading Edge Inflatable

В исследовании также может отмечаться, что реклама более здоровых пищевых продуктов способна оказывать некоторое воздействие на улучшение