• Aucun résultat trouvé

Experimental study of chemically aged HDPEpipe material in toluene-methanol mixture anddistilled water

N/A
N/A
Protected

Academic year: 2021

Partager "Experimental study of chemically aged HDPEpipe material in toluene-methanol mixture anddistilled water"

Copied!
1
0
0

Texte intégral

(1)

AIP Conference Proceedings

Volume 2123, Issue 2, 2019, Pages 1-7

Experimental study of chemically aged HDPE pipe material in toluene-methanol mixture and

distilled water

Latifa ALIMI, Kamel CHAOUI, Nacira Hamlaoui, and Khouloud Bedoud

Abstract: Studying the aging phenomenon of plastic pipes presents simultaneously an economic achievement and a technical challenge for water and natural gas transportation systems. Ver y often, they are exposed to aggressive environmental agents such as UV rays, ambient oxygen, acids, bases and some other so lvents, altering the material microstructure, its physical and chemical properties. The high density polyethylene (HDPE) material degradation and loss of performance are usually the consequence of unwanted changes in mechanical behaviors leading to lower resistance. In this s tudy, we examine the effects of distilled water (DW) and a mixture of toluene-methanol (TM) in contact with an HDPE pipe. Morphological properties such as crystallinity and oxidation induction time (OIT) are in vestigated using DSC method. Tensile tests and thermal analysis show that the TM mixture is much more absorbed by the resin as compared to DW. An increase in crystallinity is observed as established from literature for other organic solutions. Finally, the study gives an idea about property variances and their evolution as a function of the pipe thickness which c an be used as an estimation of the structural heterogeneity of the product.

Keywords : Pipe; HDPE; Aging; Distilled Water; Toluene-Methanol Mixture; Crystallinity; OIT

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

The experimental mechanical behavior curves obtained are linear elastic with different slopes denoting a slight variation of flexural modulus of elasticity of the test pieces tested.

Tout en travaillant dans une perspective de réseau et au lieu de poursuivre trois objectifs (outiller.. les intervenants, combattre l’isolement des ainés et appuyer les

In this paper, the design and performances of such ultra- wideband microwave absorber of low thickness material developed within the framework of the SAFAS

Figure H.4: Evolution of the PHP pressure ( ), the average temperature of the evaporator ( ) and the condenser ( ) and the temperatures of the adiabatic part ( ) of a start-up test

Avec GOCAD, les objets sont considérés comme des ensembles de points liés entre eux afin de constituer un maillage dont la dimension est la caractéristique de l'objet. Ainsi,

Here we focus on studying location confidence intervals as- sociated with two localization methods, classical (triangula- tion) and Double-Difference, where uncertainties due to

ISSN 0249-6399 ISRN INRIA/RR--8509--FR+ENG RESEARCH REPORT N° 8509 March 2014 Project-Teams MESCAL, RUNTIME. Modeling and Simulation of a Dynamic Task-Based Runtime