• Aucun résultat trouvé

OPTICAL, STRUCTURAL ANDMORPHOLOGICAL CHARACTERIZATIONOF ELECTRODEPOSITED CUPROUS OXIDETHIN FILMS: EFFECT OF DEPOSITIONTIME

N/A
N/A
Protected

Academic year: 2021

Partager "OPTICAL, STRUCTURAL ANDMORPHOLOGICAL CHARACTERIZATIONOF ELECTRODEPOSITED CUPROUS OXIDETHIN FILMS: EFFECT OF DEPOSITIONTIME"

Copied!
1
0
0

Texte intégral

(1)

5th International Conference On Advances In Mechanical Engineering Istanbul 2019 (ICAME2019) 2019

OPTICAL, STRUCTURAL AND

MORPHOLOGICAL CHARACTERIZATION OF ELECTRODEPOSITED CUPROUS OXIDE

THIN FILMS: EFFECT OF DEPOSITION TIME

Samiha LAIDOUDI, Mohamed Redha Khelladi, Charif DEHCHAR, Samah BOUDOUR, Leila LAMIRI, Ouafia BELGHERBI, Rabah Boufnik

Abstract : The purpose of this work is the development and characterization of a novel electrode material based on copper oxide (Cu2O) for use as electrode in catalytic application. The samples are prepared on an indium doped tin oxide (ITO) glass substrate using a simple electrochemical deposition process from a solution of copper (II) sulfate and citric acid. The Cu2O films are deposited under chronoamperometric control at a potential of ?0.50V versus SCE at different deposition times ranging from 2 to 15 minutes. The solution was maintained at a temperature of 60°C and a pH of 11. The effect of the deposition time is mainly examined in terms of the change in structural, morphological and optical properties of the Cu2O films using various characterization techniques. Atomic force microscopy (AFM) images showed that the prepared thin films are homogeneous with a granular shape.

Also, the surface of the deposits becomes roughened with increasing deposition time. Scanning electron microscopy (SEM) images showed that the morphology of the prepared thin films is composed of a mixture of cubic and pyramidal shapes regularly distributed over the surface of the substrate. X-ray diffraction (XRD) measurements demonstrated that Cu2O thin films prepared by electrochemical deposition have a pure cubic structure with higher preferred growth orientation (111) and good crystallinity.

Characterization by UV-Visible spectroscopy showed that the samples have high absorption in the visible region. The calculated values of the direct band gap are between 1.9 and 2.15 eV. These results represent a good starting point for the development of low cost anode used in catalytic application.

Keywords : Cu2O thin film, electrodeposition, deposition time, optical properties

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

Si le résultat est positif ou si le test cutané ne peut être effectué, les experts proposent trois options : remplacer la céphalosporine par un antibiotique d’une autre

„neu- trale Zone“ zwischen höher und niedri- ger darstellt: Kein Unternehmen wird üblicherweise einen Benchmark unter dem Vorjahreswert anstreben, da dies als nicht kompetent

Abstract : ABSTRACT SnO2 thin films were electrodeposited on fluorine tin oxide substrate in nitric acid solution.. The films were found uniform, adherent to the substrate

The effects of deposition potential on the electrochemical, surface morphology, structural and, electrical properties of cuprous oxide thin films were

In order to see the effect of deposition times on the morphological properties of different Cu2O thin layers, surface topographical characterization using an atomic force

Electrochemical deposition offers a versatile and facile method since the film formation and its properties (thickness and surface topography) can be easily

The structural and optical properties of ZnO thin films have been investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy UV-visible..

Precursor solutions were prepared from zinc acetate dehydrate (Zn(CH 3 COO) 2 ·2H 2 O), ethanol as solvent and diethanolamine (HN(CH 2 CH 2 OH) 2 ) (DEA) as stabilizer