• Aucun résultat trouvé

Link Availability Aware Routing Metric For Wireless Mesh Networks

N/A
N/A
Protected

Academic year: 2021

Partager "Link Availability Aware Routing Metric For Wireless Mesh Networks"

Copied!
5
0
0

Texte intégral

Figure

TABLE I: CONFIGURATION OF DEVICES USED ON THE TESTBED
Fig. 3: Four Ad hoc Paths

Références

Documents relatifs

Viho, “Q-SWiM: QoE-based Routing algorithm for SVC Video Streaming over Wireless Mesh Networks,” in IEEE Interna- tional Symposium on Personal, Indoor and Mobile Radio

In a network running a link state routing protocol, the number of hops between any random source and destination increases when the neighborhood size decreases, this way augmenting

In a network running a link state routing protocol, the number of hops between any random source and destination increases when the neighborhood size decreases, this way augmenting

When the destination node is within a different source CH domain, the inter-CH Routing Table of CHs (inter- CHTable) is used to select the routes between the end to end

We extend Proxy Mobile IPv6 (PMIPv6) to support the seamless mobility in such a Cluster Based Wireless Mesh Network.. This approach is advantageous over other existing

In terms of route length, OLSR selects always a 3-hop path, then, all metrics have the same number of medium accesses. 4: Link Throughput... For farther nodes, packets should transit

For our experiments to evaluate the suitability of R2Lab for wireless multi-hop experiments, we considered two WMN routing protocols, namely Optimised Link State Routing (OLSR) [8]

The contribution of this work is to present two exact formulations of the routing and scheduling problem in wireless mesh networks (Section III), and compute optimal solutions by