• Aucun résultat trouvé

WORLDWIDE SALES AND SERVICE FACILITIES

N/A
N/A
Protected

Academic year: 2022

Partager "WORLDWIDE SALES AND SERVICE FACILITIES "

Copied!
4
0
0

Texte intégral

(1)
(2)

MOD B

The WANGCO Mod 8 is a low-cost, highly reliable digital magnetic recording system which is ideal for small computers, data communications systems, key tape systems, and data conversion systems. Fully IBM-compatible, the Mod 8 has been designed to plug into most low-cost systems controllers.

With standard tape speeds of 12.5, 25 and 37.5 inches per second, data is written and read at densities of 200, 556, 800, or 1600 characters per inch. The Mod 8 accepts IBM hub-compatible reels up to 81f2 inches in diameter. IBM-compatible 7-track and ANSI-compatible 9-track versions are standard.

Consisting of a tape transport, transport electronics, data electronics, and a power supply, the Mod 8 has an extremely simple, reliable design. In addition, it has many exclusive features which enhance performance, reliability, and ease of operation well beyond other tape handling systems in its price range.

Among the unique Mod 8 features are (1) the use of IBM head guide spacing for reliable tape interchange, (2) variable electronic write deskewing in each channel for NRZI, and (3) a tri-Ievel read threshold including a programmable level for recovery of marginal data. In addition, a simple tape-threading path and a quick- action, hold-down knob permit convenient threading and unloading in a matter of seconds.

(3)

SPECIFICATIONS

Tape Speed

12.5,18.75,25 or 37.5 ips Data Density 9-track

800 cpi NRZI 1600 cpi PE Data Density 7-track

800/556 cpi NRZI 800/200 cpi NRZI 556/200 cpi NRZI Start/Stop Time

15.0 ± 1.0 ms at 25 ips 30.0 ± 2.0 ms at 12.5 ips 10.0 ± 0.7 ms at 37.5 ips Instantaneous Speed Variation

± 4% maximum Variation, Average Speed

± 1% maximum

Start Distance 0.17 ± 0.02 in.

Stop Distance 0.19 ± 0.02 in. Rewind Speed

100 ips nominal for 37.5 and 25 ips operating speed 50 ips nominal for 12.5 ips operating speed Dynamic Skew

75 microinches, maximum Static Skew, WRITE

Electronic Skew compensation (NRZI) Static Skew, READ

100 microinches, maximum Reel Size

up to 8V2 in. diameter, IBM-hub compatible

Number of Tracks

7, IBM-compatible, NRZI only 9, ANSI-compatible

Recording Mode

NRZI IBM-ANSI or phase-encoded Head Type

Dual or Single Gap Tape Tension

8.0 ± 0.5 oz.

Tape

Computer grade, 0.5 in. wide, 1.5 mil thick Electronics

Silicon solid-state and 930 series DTL logic Interface

DTL logic (low true) Weight

57 lb. Mounting

Standard 19 in. rack mount Power

110-125 VAC ± 10% 1 Amp.

220-250 VAC ± 10% .5 Amp.

48-62 Hz.

Operating Temperature 40° to 90° F

Non-operating Temperature 30° to 140° F

Relative Humidity (Operating) 20 to 80%, non-condensing Relative Humidity (Non-operating)

15 to 95%, non-condensing Altitude

o

to 20,000 ft.

NRZI AND PHASE-ENCODING FORMATTERS AVAILABLE.

CONTACT US FOR DETAILED TECHNICAL DATA.

(4)

WORLDWIDE SALES AND SERVICE FACILITIES

5404 JANOY PLACE. LOS ANGELES. CALIF. 90066 213/390-8081

Références

Documents relatifs

(Some authors use a parameter m that goes to infinity instead, but this is equivalent; it suffice to take ε = 1/m to recover our framework.) Asymptotic characterizations of

The solar charge controller is a controller that is used to control the charging of the solar appliances and also battery. The function of the controller is to regulate the voltage

L’objectif de cette étude est d’une part, d’évaluer la qualité physicochimique, microbiologique et organoleptique des trois échantillons d’anchois salés par

Egalement, nous avons constaté qu’un nombre important des étudiants suivant des formations en entrepreneuriat (74%), ont l’intention d’entreprendre, dont 81%

MBIE  is  the  application  of  MBSE  methods  and  technologies  to  the  interface

Peripheral Equipment Division • Most products of this group are peripheral devices to mini-computers: magnetic tape 1/0 systems, formatters, controllers, digital

The MT-120 Tape Transport consists of a hinged panel on which are mounted the mechanisms and components to provide the functions of tape storage and supply, tape

An escape character is automatically inserted into the buffer by the adapter when a line control char- acter is received, except for the following characters which do