Ubuntu Installation Guide

Using a knife or razor blade, remove about one inch of insulation from the end of the network trunk wire, exposing the red and black signal wires.. On the back of the Tap Box are

After the machine reboots, login and double- click the Network Neighborhood icon on the desktop, and you should see your Samba server listed as a member of the workgroup, as shown

• When you enter the auto qos voip trust interface configuration command on a port connected to the interior of the network, the switch trusts the CoS value for nonrouted ports or

Extended-range VLAN configurations are not stored in the VLAN database, but because VTP mode is transparent, they are stored in the switch running configuration file, and you can

The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of

The method supported by Anaconda of adding a plain "ks" boot param- eter to work out the location of the Kickstart file from a DHCP response is not yet supported by the

The method supported by Anaconda of adding a plain "ks" boot param- eter to work out the location of the Kickstart file from a DHCP response is not yet supported by the

This involves choosing your language, configuring peripheral driver modules, configuring your network connection, so that remaining installation files can be obtained directly from