• Aucun résultat trouvé

Tube banks, single-phase heat transfer in

N/A
N/A
Protected

Academic year: 2021

Partager "Tube banks, single-phase heat transfer in"

Copied!
21
0
0

Texte intégral

Loading

Figure

Table I Coefficients used to calculate overall heat transfer in tube banks using Eq. 5 with n = 0.34, p = 0.26
Table II  Design methods commonly used to calculate thermal performance in heat exchangers
Figure 1 Variation of local heat transfer around 1) a single tube 2) a tube in a staggered bank 3) a tube in an in-line banks
Figure 3  Influence of number of rows on overall heat transfer in tube banks. From  (
+3

Références

Documents relatifs

remarkable that for a given thermal activity ratio K, the present conjugate cases with different fluid-solid properties ratios lead to similar dissipation rates in the fluid domain,

The first satisfies an imposed temperature at the fluid-wall (isoT), the second an imposed heat flux at the fluid-wall (isoQ) and the third fluid-solid coupling with the same

Keywords: Thermal Energy Storage, Phase Change Material, Convective Heat Transfer

account any localized surface mode below the bulk bands and obtained finally that the creation of a free surface decreases the density of vibrational states. In

In this situation, it has been shown that particles dispersed in a wetting fluid are entrained in the coating film when the thickness at the stagnation point is larger than a

Malgré l’importance du problème nutritionnel chez la personne âgée, nous avons été surpris de ne pas trouver suffisamment d’étude sur le sujet, plutôt nous

En effet, on montrera que σ est autoduale pour une dualit´e que l’on pr´ecisera (essentiellement la contragr´ediente) ; cela entraˆıne que tout sous-module irr´eductible de σ

Through this work the following contributions were made: (1) the fifty freedom and constraint space types were found that may be used to synthesize both parallel