• Aucun résultat trouvé

Additional information on page 2. Additional information on page 2. IEC (ed.2);am1;am2

N/A
N/A
Protected

Academic year: 2022

Partager "Additional information on page 2. Additional information on page 2. IEC (ed.2);am1;am2"

Copied!
8
0
0

Texte intégral

(1)

Ref. Certif. No.

NO87473

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

1/2

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME

SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC

CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC

Product

Produit

Power supply, open frame building-in type

Name and address of the applicant

Nom et adresse du demandeur

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the manufacturer

Nom et adresse du fabricant

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the factory Nom et adresse de l'usine

Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page

Additional information on page 2

Ratings and principal characteristics

Valeurs nominales et caractéristiques principales

AC input: 1.2A 100-250V 50/60/440Hz, or DC input: 0.8A 120-300V DC Cl. I, DC-outputs: 4A +5V, 2A +12V, 0.7A -12V.

Trademark (if any)

Marque de fabrique (si elle existe)

Type of Manufacturer’s Testing Laboratories used Type de programme du laboratoire d’essais constructeur Model / Type Ref.

Ref. De type

LPT22

Additional information (if necessary may also be reported on page 2)

Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page

Maximum output power: 25W convection cooling. 40W with 30CFM forced air.

Additional information on page 2

A sample of the product was tested and found to be in conformity with

Un échantillon de ce produit a été essayé et a été considéré conforme à la

IEC 60950-1(ed.2);am1;am2

As shown in the Test Report Ref. No. which forms part of this Certificate

Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat

289397

This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'Organisme National de Certification

(2)

Ref. Certif. No.

NO87473

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

2/2

Astec Power Philippines Inc.

Main Avenue Corner Road “J”, Cavite Export Processing Zone, Rosario, Cavite, 4106

Philippines

Astec Power Philippines Inc.

104 Laguna Blvd., Laguna Technopark, Sta. Rosa Laguna, 4026

Philippines

Astec Electronics (Luoding) Co., Ltd.

No.68 Baocheng East Road, Fucheng, Luoding, Guangdong,

China

Zhongshan General Carton Box Factory Co., Ltd.

No.62, Qi Guan Road West, Shiqi District, Zhongshan City, Guangdong,

China

(3)

Ref. Certif. No.

NO87474

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

1/2

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME

SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC

CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC

Product

Produit

Power supply, open frame building-in type

Name and address of the applicant

Nom et adresse du demandeur

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the manufacturer

Nom et adresse du fabricant

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the factory Nom et adresse de l'usine

Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page

Additional information on page 2

Ratings and principal characteristics

Valeurs nominales et caractéristiques principales

AC input: 1.2A 100-250V 50/60/440Hz, or DC input: 0.8A 120-300V Cl. I, DC-outputs: 5A +5V, 0.7A + 12V, 0.7A -12V

Trademark (if any)

Marque de fabrique (si elle existe)

Type of Manufacturer’s Testing Laboratories used Type de programme du laboratoire d’essais constructeur Model / Type Ref.

Ref. De type

LPT23

Additional information (if necessary may also be reported on page 2)

Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page

Maximum output power: 25W convection cooling. 40W with 30CFM forced air.

Additional information on page 2

A sample of the product was tested and found to be in conformity with

Un échantillon de ce produit a été essayé et a été considéré conforme à la

IEC 60950-1(ed.2);am1;am2

As shown in the Test Report Ref. No. which forms part of this Certificate

Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat

289397

This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'Organisme National de Certification

(4)

Ref. Certif. No.

NO87474

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

2/2

Astec Power Philippines Inc.

Main Avenue Corner Road “J”, Cavite Export Processing Zone, Rosario, Cavite, 4106

Philippines

Astec Power Philippines Inc.

104 Laguna Blvd., Laguna Technopark, Sta. Rosa Laguna, 4026

Philippines

Astec Electronics (Luoding) Co., Ltd.

No.68 Baocheng East Road, Fucheng, Luoding, Guangdong,

China

Zhongshan General Carton Box Factory Co., Ltd.

No.62, Qi Guan Road West, Shiqi District, Zhongshan City, Guangdong,

China

(5)

Ref. Certif. No.

NO87475

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

1/2

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME

SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC

CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC

Product

Produit

Power supply, open frame building-in type

Name and address of the applicant

Nom et adresse du demandeur

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the manufacturer

Nom et adresse du fabricant

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the factory Nom et adresse de l'usine

Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page

Additional information on page 2

Ratings and principal characteristics

Valeurs nominales et caractéristiques principales

AC input: 1.2A 100-250V 50/60/440Hz, or DC input: 0.8A 120-300V Cl. I, DC-outputs: 4A +5V, 2A + 12V, 0.7A -12V.

Trademark (if any)

Marque de fabrique (si elle existe)

Type of Manufacturer’s Testing Laboratories used Type de programme du laboratoire d’essais constructeur Model / Type Ref.

Ref. De type

LPT24

Additional information (if necessary may also be reported on page 2)

Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page

Maximum output power: 25W convection cooling. 40W with 30CFM forced air.

Additional information on page 2

A sample of the product was tested and found to be in conformity with

Un échantillon de ce produit a été essayé et a été considéré conforme à la

IEC 60950-1(ed.2);am1;am2

As shown in the Test Report Ref. No. which forms part of this Certificate

Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat

289397

This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'Organisme National de Certification

(6)

Ref. Certif. No.

NO87475

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

2/2

Astec Power Philippines Inc.

Main Avenue Corner Road “J”, Cavite Export Processing Zone, Rosario, Cavite, 4106

Philippines

Astec Power Philippines Inc.

104 Laguna Blvd., Laguna Technopark, Sta. Rosa Laguna, 4026

Philippines

Astec Electronics (Luoding) Co., Ltd.

No.68 Baocheng East Road, Fucheng, Luoding, Guangdong,

China

Zhongshan General Carton Box Factory Co., Ltd.

No.62, Qi Guan Road West, Shiqi District, Zhongshan City, Guangdong,

China

(7)

Ref. Certif. No.

NO87476

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

1/2

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME

SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC

CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC

Product

Produit

Power supply, open frame building-in type

Name and address of the applicant

Nom et adresse du demandeur

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the manufacturer

Nom et adresse du fabricant

Astec International Ltd.

16th Lu Plaza, 2 Wing Yip Street, Kwun Tong, Kowloon, Hong Kong

Name and address of the factory Nom et adresse de l'usine

Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page

Additional information on page 2

Ratings and principal characteristics

Valeurs nominales et caractéristiques principales

AC input: 1.2A 100-250V 50/60/440Hz, or DC input: 0.8A 120-300V Cl. I, DC-outputs: 4A +5V, 2A +15V, 0.7A -15V.

Trademark (if any)

Marque de fabrique (si elle existe)

Type of Manufacturer’s Testing Laboratories used Type de programme du laboratoire d’essais constructeur Model / Type Ref.

Ref. De type

LPT25

Additional information (if necessary may also be reported on page 2)

Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page

Maximum output power: 25W convection cooling. 40W with 30CFM forced air.

Additional information on page 2

A sample of the product was tested and found to be in conformity with

Un échantillon de ce produit a été essayé et a été considéré conforme à la

IEC 60950-1(ed.2);am1;am2

As shown in the Test Report Ref. No. which forms part of this Certificate

Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat

289397

This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'Organisme National de Certification

(8)

Ref. Certif. No.

NO87476

Gaustadalléen 30 NO-0373 Oslo, Norway

Date: 15-07-2015 Signature: Nastaran Vadoodi

Certification Department

Issued 2007-04

2/2

Astec Power Philippines Inc.

Main Avenue Corner Road “J”, Cavite Export Processing Zone, Rosario, Cavite, 4106

Philippines

Astec Power Philippines Inc.

104 Laguna Blvd., Laguna Technopark, Sta. Rosa Laguna, 4026

Philippines

Astec Electronics (Luoding) Co., Ltd.

No.68 Baocheng East Road, Fucheng, Luoding, Guangdong,

China

Zhongshan General Carton Box Factory Co., Ltd.

No.62, Qi Guan Road West, Shiqi District, Zhongshan City, Guangdong,

China

Références

Documents relatifs

le droit d’usage de la marque QB 08 Canalisations de distribution ou d’évacuation des eaux pour le produit objet de cette décision, pour toute sa durée de validité et dans

Cette certification donne la connaissance du produit et les compétences dans le service des spiritueux, nécessaires pour travailler par exemple dans la vente ou le service

formance implementation of these commonly used functions. Process Control Register 1·172.. 2) A single instruction to implement each call or return operation results in

The internal error rate tests can only be initiated by a diagnostic program running on a host computer, and are not accessible by a user interacting through

Particularité : Option F+ - Structurés - Décorés - Option glissance non revendiquée Comportement au gel : Satisfaisant selon essai normalisé. Dimensions (mm) Particularité du

Échelle 9 Les interventions orales de l’étudiant·e et ses messages écrits sont pertinents pour son enseignement et pour la communication avec ses divers partenaires

Cette unité recouvre tout ou partie des compétences exigées du titulaire du Brevet d’études professionnelles Agencement pour effectuer l'analyse esthétique et technologique

C’est à l’occasion de la FOIRE D’AUTOMNE, qui s’est tenue à Paris Porte de Versailles, que Arnaud BARATTE, créateur de la tasse DELISSEA s’est vu remettre la