Eddy Current Analysis of Titanium submitted tothe stress

The number of oscillation decrease for the F3 load and the material is near the rupture, the movement of the microstructure is very important and the material is the instability

The investigation of NDT methods to predict corrosion behavior can be a rational solution to prevent from this kind of industrials problems.Eddy current and pulsed eddy current

This method significantly improves the detection of cracks of two different kind of material (non magnetic conductive material and ferromagnetic material). The magnetic flux

We have used a 2D numerical model based on the Finite Element Method (FEM) to simulate the NDT inspection process and to predict the corresponding signal sensed by the GMR

Chapter 5 focuses on the evaluating of the thermal sprayed Hastelloy C22 coating on a type 304 substrate by combination of acoustic microscopy and eddy current method in order

2 or 3 dimensional (depending on the dimension of the test sample) finite differences space discretization is used for the resolution of the diffusion equation and dynamic

Keywords : metal powders, Mechanical Alloying, Magnetic Properties, Eddy Current, NDT, nondestructive testing, process monitoring, nanocrystalline materials, planetary ball

Analysis of the data showed that the sensor output was in relation with different parameter of powder (diameter, density and structural) that the sensitivity of the sensor