• Aucun résultat trouvé

Simulation methodology for Large-Bandwidth Track-and-Hold microwave circuit

N/A
N/A
Protected

Academic year: 2021

Partager "Simulation methodology for Large-Bandwidth Track-and-Hold microwave circuit"

Copied!
5
0
0

Texte intégral

Figure

Fig. 2. The simulated large bandwidth T/H structure
Fig. 3. (a) Illustration of the windowing function on the signal and (b) the equivalent frequency response for α = 0.25 ,we can observe how the linear gain compensate the attenuation
Fig. 6. Obtained output isolation (12) from the input in Hold mode (a) with good initial condition (b) with bad initial condition
Fig. 7. Obtained Noise figure in (a) track mode and (b) sampling mode, we can observe how the noise increase by aliasing effect

Références

Documents relatifs

The lower bound in Theorem 1.3 is a direct consequence of the above inequality and of the following result, whose proof is a straightforward application of the methods in

We shall say that two power series f, g with integral coefficients are congruent modulo M (where M is any positive integer) if their coefficients of the same power of z are

In view of this, the present work uses the nonlinear variational homogenization method (Ponte Casta˜ neda [29]) or equivalently the modified secant method (Suquet [43]), which makes

In Section 4, we describe the algorithm finding the worst cases of periodic functions for large arguments.. This algorithm is analysed in

To align this study, based on Alexa and its counterparts, more information was needed concerning the different web traffic tools available on the market today, it was

The mucosal predominance of this antibody isotype depends on a cooperation between local plasma cells that produce polymeric IgA (pIgA) and mucosal epithe- lial cells that express

Pour le cas de la desorption, on étudiera les effets de la température d’échauffement du réacteur, puis l’influence de la conductivité thermique du métal sur les deux

[r]