Kinetic parameter estimation from TGA: Optimal design of TGA experiments

The comparison with the results obtained from interaction parameters fitted to experimental data of the binary systems ethyl lactate− ethanol and ethyl lactate −water at 101.3

Even though some time dependent phenomena (such as creep or heat diffusion in the soil) cannot be acurately reproduced, the experimental results thus obtained

Compare the theoretical versus experimental values obtained for the energy required for the cutting process as a function of coiled tubing size.. 5.1 Cutting Force

The comparison between the median hmF2 values, obtained using both formulations, with the IRI model, shows that the IRI underestimates the observed hmF2 values dur- ing all the

A closed loop optimal experiment design for on-line parameter identification approach is

Moreover, in terms of model parameter identification, the observer has to be designed to estimate on-line not only model states (if any), but also the unknown constant parameter

The first one dealt with an inverse problem of non-linear heat transfer to estimate the thermal properties (storage and transport coefficients), con- sidering a uniform

An experimental set-up is proposed to collect information on the prediction (e.g., heat storage or heat trac- ing experiment) and a global sensitivity analysis on the data