Atomic structure of Sr/Si(0 0 1)(1 × 2) surfaces prepared by Pulsed laser deposition
Texte intégral
Figure
Documents relatifs
Next, we annealed the films at 1000 and 1350°C in order to gain understanding on the relation between the annealing temperature, the microstructure obtained and the
Le centre GPL de Sidi Bel Abbes est un centre de stockage et de livraison des produits GPL, situé a la zone industrielle proche de la ville, et entouré d’autres activités
(3) The observation that Li (K) atoms form linear chains perpendicular to the dimer rows at the initial stage of adsorption appears to be contrary to the earlier experimental
The finding of longer walking time when using the AR application is consistent with prior work, which showed that people with typical and low vision walked slower while performing
Comparison of the results shown in Figures 2 and 3 yields the following important information on the relation between the preparation conditions and the obtained magnetic
Observed surface roughness (~ 3.9 nm) can be attributed to the higher substrate temperature during deposition. Figure 5 shows the hysteresis loops of the target in two
Comparativement aux structures MIM composées de couches (a-C:H) avec un gap optique situé dans l'infrarouge, on constate que l'électroluminescence détectée sur des structures
The key finding of this first prospective, observational 10-year follow-up study including community-dwelling patients visiting their GP for a respiratory infection is that