<036> <106> <077> <066>
1E 46 3F 36
use of the Local Print key and the appropriate menu selection
0413/0463
Dumps a bit-image to an 8-bit graphics printer. When character protection is disabled, this command prints all full-intensity characters between the margins in the current window, beginning with the row containing the cursor. When character protection is enabled, prints all unprotected text in the current window, beginning with the row containing the cursor. Prints dimmed and protected text as spaces. Transmits CR-LF sequence on initiation of print activity.
Reverse video spaces and underscores are printed as they appear on the screen.
If this command is initiated by the host computer, the terminal responds with a Ctrl-F «006»
when the printing operation is completed only if this option is enabled in the Configuration Menu. To abort this command press the Local Print or Cmd-CR keys.
2-82 014-002111
Window Bit Dump
<036> <106> <077> <065>
lE 46 3F 35
<036> F ? 5 or
(octal) (hex) (ASCII)
use of the Local Print key and the appropriate menu selection
041310463
Dumps a bit-image to a graphics slave printer. Prints the current window exactly as it appears to the user including reverse video and underscores. Disregards the blink and dim attributes.
If this command is initiated by the host computer, the terminal responds with a Ctrl-F (006 octal) when the printing operation is completed only if this option is enabled in the Configuration Menu. To abort this command press the Local Print or Cmd-CR keys.
Print Pass Through On
<036> <106> <077> <063>
lE 46 3F 33
<036> F ? 3 or
<036> <106> <140>
1E 46 60
<036> F ' or
(octal) (hex) (ASCII)
(octal) (hex) (ASCII)
use of the Local Print key and the appropriate menu selection
all terminals
Sends all subsequent characters from the host to the printer without affecting the display screen;
the character flow from the host is interpreted by the printer and not by the display unit (with the only exception being the Print Pass Through Off command). To abort this command press the Local Print or Cmd-CR keys.
Print Pass Through Off
<036> <106> <077> <062>
1E 46 3F 32
<036> F ? 2
or
<036> <106> <141>
1E 46 61
<036> F a or
use of the Local Print key
(octal) (hex) (ASCII)
(octal) (hex) (ASCII)
all terminals
Turns off Print Pass Through so that character flow from the host computer to the terminal is once again interpreted by the display unit. The display unit returns a Ctrl-F (006 octal) to the host to signal that the printing operation is completed only if this option is enabled in the Configuration Menu. This sequence is not copied to the printer.
2-84 014-002111
Printer Pass Back To Host all terminals
<036> <106> <170> <n>
1E 46 78 <n>
<036> F x <n>
where
<n> determines the print mode:
o
turns this feature off 1 turns this feature on(octal) (hex) (ASCII)
The terminal responds to this command with the following string:
<036> <122> <170> <n>
1E 52 78 <n>
<n> reports the current information on this mode:
1 pass-back-to-host mode is now set
o
it is reset or cannot be set.See the "Forming Command Arguments" section in this chapter for more information on <n>
values.
Lets the host receive data directly from an attached device on the other port. This lets
application software directly control and monitor a digitizer, scanner, bar code reader, or similar device. When this mode is set, all data comirig from the printer port is sent to the host computer and the keyboard is disabled.
Simulprint On D413/D463
<036> <106> <077> <061>
1E 46 3F 31
use of the Local Print key and the appropriate menu selection
Sends all characters received from the host to the attached printer while simultaneously displaying the characters on the screen. Once this command is issued, all subsequent print commands are ignored (with the exception of the Simulprint Off command). To abort this command press the Local Print or Cmd-CR keys.
Simulprint Off
<036> <106> <077> <060>
1E 46 3F 30
<036> F '? 0 or
(octal) (hex) (ASCII)
use of the Local Print key and the appropriate menu selection
0413/0463
Turns off Simulprint so that character flow from the host computer (to the terminal) is no longer copied to the printer. If this command is initiated by the host computer, the terminal responds with a Ctrl-F (006 octal) when the printing operation is completed only if this option is enabled in the Configuration Menu. To abort this command press the Local Print or Cmd-CR keys.
VT -style Autoprint On
<036> <106> <077> <070>
1E 46 3F 38
<036> F '? 8
(octal) (hex) (ASCII)
all terminals
Turns on VT220-style autoprint mode. This command performs a line-buffered print operation.
The line that the cursor is on will not be printed until a CR, LF, or VT is sent to the terminal or until autowrap has occurred .
. VT -style Autoprint Off
<036> <106> <077> <067>
1E 46 3F 37
<036> F '? 7
Turns offVT220-style autoprint mode.
2-86
(octal) (hex) (ASCII)
all terminals
014-002111
Select Printer National Character Set
<036> <106> <067> <nn>
lE 46 37 <nn>
<036> F 7 <nn>
where
<nn> sets the printer language:
00 keyboard language 01 U.S. ASCII
02 United Kingdom 03 French
04 German
05 SwedishlFinnish 06 Spanish
07 Danish/Norwegian 08 Swiss
09 Katakana
(octal)
(hex)
(ASCII)
all terminals
See the "Forming Command Arguments" section in this chapter for more information on
<n>values.