• Aucun résultat trouvé

Effect of textured area on the performances of ahydrodynamic journal bearing

N/A
N/A
Protected

Academic year: 2021

Partager "Effect of textured area on the performances of ahydrodynamic journal bearing"

Copied!
1
0
0

Texte intégral

(1)

Tribology International

Volume 44, Issue 3, 2011, Pages 211-219

Effect of textured area on the performances of a hydrodynamic journal bearing

Nacer Tala-Ighil, Michel FILLON, Patrick Maspeyrot

Abstract: A growing interest is given to the textured hydrodynamic lubricated contacts. The use of textured surfaceswith different shapes of microcavities (textures) and at different locations of the texture zone can be aneffective approach to improve the performance of bearings. The present study examines the texturelocation influence on the hydrodynamic journal bearing performance. A numerical modelling is used toanalyze the cylindrical texture shape effect on the characteristics of a hydrodynamic journal bearing. Thetheoretical results show that the most important characteristics can be improved through an appropriatearrangement of the textured area on the contact surface.

Keywords : textures, Hydrodynamic lubrication, journal bearing, Finite difference method

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

On the use of a Nash cascade to improve the lag parameter transferability at different

Third, Karkkainen’s approach (5) emphasized the knowledge-oriented integration of the customer direction, which is important for instance for engineer-to-order companies,

The variations in the bearing static characteristics (load capacity, maximum hydrodynamic pressure, friction torque, axial film flow, attitude angle, and the energy dissipated in

The presence of textures over the entire surface of the bearing does not necessarily improve the hydrodynamic characteristics (friction reduction, increased

The results obtained show that the mostimportant characteristics of the contact like minimal film thickness, maximal pressure,axial fluid flow and friction torque can be

Texturing the contact inlet region (cases 10 to 12) has a modest and negative effect on the bearing performances; + 0.1% for the maximum pressure, -0.2% for the film thickness and no

The variations in the bearing static characteristics (load capacity, maximum hydrodynamic pressure, friction torque, axial film flow, attitude angle, and the energy dissipated in