CLASS DOCU- MENTS

EL&

CLASS DOCU- MENTS

INDEX

TABLE 1

STRACTS AB-

OFDEC

STAN-

DARDS

SECTION

o

REV.C

;;:L & 76(;5 IND~

Section Ii! Page 1

This index includes a list of all Digital Star1ards, A-SP-7565XXX-XX-XXXX specifications, i:lnd mi:lnuals ma~nt<lined by Star;dards & Methods Information and Control. Ref",rences to all documents contain ~atest. version dates, responsible person, depa~t.ment. and th<'! standards manaqe<nent group r<'!sponsi;,le for the document. Standards "re listed with abstracts.

ECC t

:ligital Stds.

Administration

Document Identifier

..

..

.. ..

• .. ^{.. ..} _..

• ^.. _{.. ..}

•

EL " 7665 INDEX Section IJ

TABLE OF CCIfi'ENTS/REVISIQN STATUS

Subhead

Title Page

Table of Contents/Revision Status 1 INTRCDUC'l'ION

l.l~

1.2 SCOPE

1.3 ;!.ESPONSIBILITIES

Digital Standards, Listed In N'-1merical Order, With Abstracts

Tab1", 2 EL C~ass Mam.lCtl,; " CJtl,er Documents

A-SP-766SXXX-XX-XXX Spec~fications

Informatioi"1 Locator

Digital Standards, etc., Categorized by Sllbject keywords and Areas of Interest

27-Mar-81 27--1'1ar-81 27-Mar-81 27-+1ar-81 27-Mar-lll

27-Ma.-81 Page 2

Page

EL " 7665 INDEX Section II

This ind"x contains a complete l i s t of Digital Standards, A-SP-7665XX:;:-XX-XXXX Specificatir:,ns, and ottler levels of documentation cinder EL Class contro~ arranqed to facilitat .. the location of pertinent doC'tmentatlon.

1.2 SCOPE

Table 1 lists each Digital Standard in numerical order with an abstract, revision level, latest ECO date, level and category of .'1[or;nation, depart.ment responsible [or implement.ing the standard, person resporlsible Eor the standard's technical content, and the s~.arldarjs :!liInagement group responsible for .lwintaining the standard.

Section 1 (a :>eparate document) to help

individuals find informat.ion.

to specific tecllnical areas a~eas include Design/DraEting Service Product. Support, Manuals,

1.2.1 Notations; Stat.us And Distribution Restrict.ions

?rClP'lse-d :>tanda.,"", that ilre not yet ap?roved -'UP. listed as "NI:li< ~1'::J :~

PR"XESS·' •

... ...

... ...

... ...

... ... ...

~

..

.. ..

.. ..

, _..

EL I. 76fS INDEX

Section II 27-Mar-81 P~ • .{

A.pproved standards that are currently being revised lire listed with II note, ~CHANGE IN PROCESS", If the change is not actively being worked but planned it will be identified: ·CHANGE PLANNEO".

For "CIU!.NGE IN PROCESS" documents, the revision of interim passes will be identified by the (XSS) schelDs defined in lIF.C STD il14. The latest pass on record with .lee Standards is Indicated in this index.

Those standards that are company confidential and released on a "need to "no~'· basis are ii3tt'd with the note, "RESTRICTED DISTRIBUTION",

1.3.1 Digital Standards Adminl.straucn

The :Jigital Standards 1\dmini$:..ra.:,,~ '.:1 E1 Standa.ds and Methods Information and Cor:crol ~s responsible for maintaining and publishing this index .:>n a regular basi,,; ir. accordanca with OEC STD iliIl, Se.;tion

,.

!;tandardl> Managel!lent Groups

Sc' 'ldu::ls Management groups are re!<ponsible for the mOlnagement of the 'J? :e and maintenance of Standards, Policie:!', Guidelines, etc. in th'!!H indicated sphere of responsibility. This includes establishing review cycles for existing staru:ards, identifying the need for new scandar::ls, o>lanning OInd seclJring resources f.Jr development of new standards, inslJring that existing document~ have owners and responsible departinents, reciring 'lbsolete dC'cUlnents and interfilcing with other Standards Management Gr,,;oups OInd Dlgi=.al Standards Admi .. d:;:;;r,,~ion to coordinate wr~ti"'c, r~views 'Ina distribution/control issue.i.

3tandaros and Methoos nrovides -3n individual to assist the Standards Group M-3nag~rs in cooroinat: ng review and distribution/""ntrol is!Oues •

Software and Architecture Standards

,"L12-3.'E~1

~23-4394

ar.cl Sta .. .dards and Methods

St<=n'iOlrds and M",chods Contact JOS",phl.,,, MCCarthy ,"!'A-4/::99 ::r:N: 223-21l29

EL " 766S INDEX

Section iii 27-Mar-81 paqa 5

[lllcdware Design Assuran.:e Standllrds Paul Rey

ML8-4/H19 DTN: 223-2348

Stllndards lind Methods Contact Steve- Millard

ML3-2/ES6 J:1l'N: 223-8501 Eng. InfoCTllatlon and Oocl.z.I.entation Standards

Mgt.; Jo'" I<urta MU-VE99 223-8895 Zffort!l are in 8rocess G(OllPS·

Standards 1100 Methods Contact Joe Mc:;Cullough l'IL3-2/E56 DTN: 223-3947 identify other Standilh'ds Management

Gr<>ut'Oi a>:e t'ropos<:!d for ella followlng categories:

o Manufacturing Process aoo Quality Assurance Contact, Dennis MilIjikas

l'IL4-4/E99 OTN: 223-800 ..

o ComP'lnent Engineering and S8ecifications Contact: Dennis Jl!ajika~

,..,r.4-4/E99 D'I'N: 223-800'14 o Pnxluct/PcO<]cam Management

Contact: Jack Downing iIIL3-2/ES6 DTN: 223-"i843

"JREil lrouP :nanagers are identified; all questions and concetns in thlS <lrea Should be forW"ard~ to the listed St;.nda:-ds and Method"

"]roup ,;.~nt'lct for t.hat c<lt:!qory.

1.3. j Responsible Departrlents

Each stand,'r:l will have a depart:.lle.lt or oq,mization respo'lsible f.)c ':he content of a spec:f:..: !>t:andard. Thi3 organization is r-equired to l.de,·,ttfy<In inriividl'<ll tohandlaque>1tions,prob.!.ems, etc. associated ... ith that standard should thO'? li51...o. individual be cea5signed or l .... ~ve the ,:ompany.

Net'" that DEC S"I'D 1I1i11 requHes listing of those who have specific respunsic-ilaies for following " ! "''>Rforming t") the requirements of t;:at st<lnd<lr<J.

.. .. .. _{.. ..} .. .. .. .. .. .. .. _{.. ..}

.. .. ..

..

E[' ... 7665 INDEX Section iii 27-Mar-81

Abst("acts of Digital Standards (Status as of 27-Mar-81)

Page 6

.. ..

EL &-7665 IND£X 27-Ma~-al paqe 7

Table 1. Abstracts of Digital Standards

DEC sm 001, Section 0 Digital Standards System Policy Rev. J. 27-Sep-79 ("evel I; Policy) EstabHshes the policy r89arding Digital Standards, describes the cateqorias and levels of information included in Digital Standaras, and dsfines the responsibilities and rolas assigned to the various cOlllDittees and organizations involved in the !!IanCtg'l!DIent and administration of the Digital Standards Systl!Dl.

Department, Standards and Methods Information and Control

Responsible Person; Joe Kurta

Stels. Mgrnt. Group: Engineering Infonnation and DocUDlantation Standards

DEC S'I':) .11'11, Sect~on 1 Creation and Change Procedures Rev. J 27-Sep-79 (Levell, Procedure) Describes p~ocedures for thy creation, revision, releasb', ard distribution of Digital Standards.

Department: Standards and Methods Information and Control

Resp:lnsible Person' Joe Kurt"

StdB. Mgmt. Group, Engineering Infornlation and Oocumentation Standards

DEC sm 001, Section 2 Format and Style Reguirements Rev. j 2J-sep-19 (Level 1: Requirements) ABSTRACT, Describes the format ane: style requirements and general or']anization of Digital Standards.

Department: Standards and Metnods Infonnation and Control

Responsible Person, Joe KurU

Stels. Mgmt Gro.,p, Engineering Information and Oocumentation Standards

Table I (Cant' d)

AC Power Wiring, Safety Grounding, Receptacle a ,d Electrical Rating

Page 8

~~~~~ati~~~:1~i~~:~1;

RequiIements) ABSTRACT: Defines requirements for AC !iOwer wiring and grounding, types of outlets, power cords and plugs, and nameplates to be used on Digital.

Depart:nent, Powe:- Supply Engin€e:-inq Responsible Person; F. Loya

Stds. ~'.1t. Sroup, Hardware Design Assurance

Ha:-dwa~e Manu"l Standard

Rev. t 1-~eb=g3 (Levell: Requirements) ABSTRACT: Esta!:.>!is!}e:;; ple.nning, control, contents, and brmat requirements for the pUblication of all ha('"dware manuals and h"rdware-relatoo c'_.,tomez:- user guides.

Department, Communciations Development and Publishin'~

.. ..

•

ResEJOnsible Pe,,,;on: Cl'_'flI !Jaems •

Stds. Mgmt. G:-oup: Enginc-erinq Information and

Documentation Standards •

Circuit Design Guidelines Rev. A 19-Jun-7" (Level I: Guidelines) Presents design information, rules, and

!crmulas far use in circuit design. Includes 1u';:del~nes F..,r using active and passive components, pril1ted circuit boards, a:oct il1fo=at:on "bout circult yerfarmal1ce.

ParSOI1: D::ln Marshall

Group: ;,ardware Design Assurance

..

• ..

.. ..

.. ..

.. ..

• .. .. ..

It .. .. ..

:e ..

.. ..

..

Page 9

Table 1 (Cont'd)

:)EC STU ""5, Section '"

NEl<; STD IN PROCESS

Product Waivers - Types and Conditions Re",'. A(XOil) 15-();:t-BB (Levell:

FOR INTERNAL

Requirements)

Descdbes the required procedure for repocting products that do not comply "'ith applicable Diq ital Standards •

USE ONLY STATUS: BEING WOf(KED

Department: Field Service Installation Quality Responsible Person: Bob Brown

St:ls. Mgmt. Group: Hardware Design Assurilnce

::JEe ST!) 305, Seetio:"! 1 NEW ST'') IN PROCESS

Product ' ... aivers - Technical REV. A(Xlll} lS-'Jct-BIl (Levell:

FOR INTEIlNAL USE ONLY

Procedures)

teChnical w~~~~!~es procedures for processing

STATUS: B~

Depar!.ment: Field Service Installation Quality Responsible Person: aob Brown

Stds. Mgmt. Group: Hardware Design Assurance

DEC STD >HIS, Sect ion 2 NE:'''; ST!) IN PROCESS

Product '"aiver,; - Product Lin"

Rev. A(X01) lS· ~t-80 (Levell:

FOR INTErlNAL USE ONLY -

Procedures)

Describes procedures for processing Product Line waivers •

EL " 7665 INDEX 27-Mar-81 P~e 1"

Table 1 (Cont'dl

DEC STD 005, Section 3 NEW STD IN E'ROCESS

Product Waivers - Repetitive, Infonnational, and Other

FOR INTERNAL uSE ONLY

Rev. A(X01) 15 o::t-B0 (Levell:

Procedures) STATUS:

Department: Field Se!vlce Installation Quality Responsible Person: Bob Brown

Stds. Mgmt. Group: ltardware I:asign Assurance

DEC STD 005, Section 4 Product Waivers - Reporting Products Non-ComplilllLt With Digital Standards Rev. A(X011 15 O::t-B0 (Levell:

FOR INTERNAL Uf; ONLY -

Procedures)

Describes the required procedure for reporting products that do not comply with appllcable Digital Standards.

STATUS: BEING \\QRKED

Department: Hardware Design Assurance Responsible Person: Dick Amann Stds. ~mt. Group: Hardware Design Assurance

DEC STD 005, Section 5

~E"1i STD IN PROCESS

Quality Assurance Operational Alert - Product Hold Procedure

FOR INTERNAL USE ONLY

Rev. A(XIin) 15 OCt-a0 (Levell:

Re"uirements, Procedures)

".,-,'!'AACT: Describes how ar. Operational Alert (OPAL)

"ssage: is author ized and issued to stop shipment of a product that has a safety defect or a serious

functionaldefec+:.

STATUS: BEING w:JRKED - WILL SUPERSEDE

~\-SP-i665i9B-0-iil WHEN RELEASED DeparLmen':: Central ::luality Assurance Responsible Person: Dennis Majikas Stds. Mgrr.t. Group:

~ .- _.- .- .. _.- .. .. .. .. .. .. _.- .. .. .. .. ..

.- ~

.. •

• ..

..

•

•

•

27-Mar-Bl Page 11

Table 1 (Cont.' d)

DEC STD ~"5, Section 6 NS',"" STD IN PROCESS

In-Plant product Safety Hold Procedure Rev. A(X!H) 15-Oet-89 (Levell:

Procedure)

ABSTRACT: Describes how tbe product safety bold prccedure is impleDlentad.

FOR INTE::tNAl. STATUS: BEIN::' WOnKED -WILL SUPERSE:DE

USE ONLY A SP-7665Jl9-9 9 WHEN RELEASE:D

Department: Corporate Produc:t Safety Responsible Par9':ln, Ron l'Iinezzi Stde. M;Jmt. Group: rurd_re Design · ... suranee

Part and Doc\Jlllent Nal\1ing conventions Rtov. A 16-0et-89 (Level 2: Requ1retllentS) ABSTRACT: Provides rUles and. requirements for nallling parts and engineering drawings witr. nallles that are brief, consistent, and follow a uniform format. It applies to the naming of all 59-79, 94, and 95 Inventory Class parts and drawings • De~rtment: engineering Information Control Responsible Person: Frank AlIa

Stds. ~mt. Group: Eng. Inf."!rmation .. Documentatien StandardS

Describes what projec~s require design rev ie'>A , bow a design review committee ~s formed, when design reviews are held, and what the desigil review cOIIIIIittees responsitlilities are.

Department: Chief Engineer's Office Responsible Persoll' Carl Noelcke St.ls. Mgmt. Group: F;":JdllCt!program I".anagement

EL '- 7665 IHDBX

DEC STD !!I!!I8 ':HAHG£ PLANNED NCYr SCHEDULED

DEC STU 399 CIiMlGE PtANNEO NOT SCHEOUI,c:O

27-Mar-81 paq. 12

Table 1 (Cont'd)

Project Scheduling Syst.elII

Rev, A 19-Nov-74 (Levell. Requirements) Intended to facilit.ate the planning.

exeeut.ion, and raview of davelopnent. projects. All discrete projects which are expected to involve total expenditures of $10,999 or IItOre must. be included in t.he system. Describes scheduling techniques that are used as well as scheduling' reviews.

Department; Engineering Operations Management COlIIDittee

Responsible Person: Charlie Picariello Stds. Mgmt. Group. Product/Program Management

Standards

Project Specification Rev. A ll-May-68 (l..eve1 1. Policy

& Requirententj

Describes requirements for a Project Specification, including approval procedure, hardware, software, cost estimate, schedule and design reviews.

;)apartment; Chief Engineer's Office Responsible Person: Carl Noelcke Stds. 1"qmt. Group: Pr<Xiuct/Program Ma:lagement

Standards

DEC SID 91i1, Section 0 CHANGE IN PROCESS

Engineering OocUlllentation CheCking:

=~~ilei3n~y

65 (Level 2. Requirements) 1'0 RESTRUCTURE INTO

SECTIONS

Defines the responsibilities of the checker in the acceptance and release of eogineering documentation. Describes Willt information is needed from Engineering and Design/Draftirq to meet this obligation.

STATUS, REV. B (X02) 27-oct 80 OUT FOR LIMITED RE:VIEW 3 NOV 8i1

Deparunent. Standards and Methods Infor.nation and Control

ResponsiblePe,son: JoeKurtJ

Stds. /llgmt. Group. Engineering Info[TIliltion lind DocWllentaLion Standards

..

.. ..

.. .. •

• ...

•

•

EL , 7665 INDEX 2711ar-81 Page 13

Table 1 (Cont'dl

OEC

sm

il1O, Secti.;>n 1 NEW SECTION OF STD.

Document Resuir_ents Checklist:

Mechanical, Electrical. General and IN PROCESS

=~1:tx~~P"~Oct_81J

(Lavel 2:

Guidelines)

Provides guidelines for checkers in meetil'l9 doclAl'lent req111rements as speclf!ed in Digital and other dOclldlentation standards.

STATes: REV • • '\ [X02) 27-0ct-81!! OUT FOR LIMITED REVIEW 3 NOV 811

Department: Standards and Methods lnform ... tion and Control

Responsible Person: Joe Kurta

Stds. Mgrnt. Group: tn;ineerinq Infor:nlation and DoclIIIIentation Standards

DEC SID 01il, Section 2

~EW SecTION PLANNED

Document Requirements Checklist: Printed

aH~ui ft~~:i92:

Guide! ines)

DEC STO 011

Department: Standards and MElthods Information and Control

Responsible Person: Joe Kluta

Stds. Mgfnt. Group: EI'I91neering Information and Documentation Standards

VAX-ll Procedure Calling and Condition NEW STANDARD PLANNED

:~~l 'nee;j~~rd

Requirement;>,

Not available Department;

Responsible P,Hson, Tom Hastings Stds. Jlllgmt. Group: Software 4nd '\rchitect'Jr9

St4ndards

EL &. 7665 INDEX pag:e 14

Table 1 (Cont'd)

DEC SID "12, Section ~ CHANGE IN PROCESS

Unified Numbering Code: Policy on Part and Document identification Conventions Rev. E 12-Jul-78 (LweI 1: Policy) TO RESTRUCTURE INTO

SECTIONS

ABSTRACT: Governs the assignrnel~t of identifying numbers to parts and all related drawings employeil for reference and construction purposes. The code has been purposely devised to accommodate the diversifi.ed requirements of Digital Eq'Ji[:ment Corporation Or'ganizational groups, while retaining uniEorn nlll1lberinq fCrnlats which can be easily interpn!ted by all concerned.

STATUS: CHANGE IN PROCESS AT REV. F (XU) IS-Mar-a 1 AWAITING DETAILS of IMPLEMENTATION Department: Standards and Methods Infornation and

Control :lesponsible Person: aill Buck

Stds . .'·~:"t. Group: Engineedng Inf:;,r;nation and Documentation Standards

DE:C STD 012, Section 1 CHA.'lGS IN PROCESS

Mnemonic Drawing Codes

Rev. Il 6-Dec-79 (Levell: Requiremen1:s) Defines the requirements for the

"ssignment :IE ">!nemonic Codes to all Jocumentation under the scope of DEC SID 1I.i.2. No code is considered v3lid on documentation covered by DEC STD J12 unless listed herein.

STATUS: Rev. J (X00) BEING PREPARED Department: Standards and Methods Information 3nd

Control 'l.esponsible Person: Joe Kurta

Stds. ~mt. Group: Engineering Information and Documentation Standards

• •

•

•

Page 15

Table 1 (Cont' d)

DEC S'I'D ;112., Section 2.

CHi\NGE IN PROCE:SS

Inventory Class Codes

Rev. F 6-Dec-79 (Levell: Reqllirements)

FOR INTERNAL USE: ONLY

Lists assigned part identifers a.nd document identif'H codes "llthorized for use within Digital. It ide/Ltifers person/organizations responsible for issuing numbers within e"ch cl"ss.

References to "ther Digit"l Stand"rds are provided for details regarding sp.:lcial class code appl ieati"ns.

STATUS: RE:V. H{X~;I) 16 JAN 81 OUT FOR LIMITED REVIEW 16 JAN 81

Department: Standards and Methods Information and C"ntro1

Responsible Pers"n: J"e Kurta

Stds. Mgrnt. Group: Engineering Information and Oocurnentati.ln Staneards

DEC S'rD In, Secti.on 3 E'ackaqe System Identificdtion Rev. C 6-Sep-79 (Level 2: Requirements) Standardizes the applica.ti"n "f the Unified Numbering Code (UNC) for identification of part numbers for packaged systems "1arketed and sold by Digital.

Depart:nent: P"ck"ged Systems Responsible Person: Walt Colby

Stds. "!gmt. Group: Engineering Information and Document",tion St"ndards

0E:C 3'I'D ~l2, 3ection 4 Sof::ware Distribution Center part

:~~e~1~4_~~;;~t~~:~el

2, Requirements)

Dep"rt:nent: So~t· ... are Responslble person:

Stds. Mgmt. Group:

EL • 7665 IND£X 27-Mar-81 Page 16

Table 1 (Coot'd)

DEC sm 2112, Section 5 ~!:il'!C! Control Part Nl.ebering Rev. A l:l-:','r-79 (!.evel 2: Requirements) EstaCl.shes the procedure for assigning Unified N;'\III~ering Code (UNC) part m.mbers by Manufacturing to permit greater flexibility in measuring and controlling lIIaterial and process flO'".

Department: Manufacturing Accounting •

~i.n*~~ ~!:~: E~~ne":~!~

Inforntation and • Documentation Standards

DEC sm 012, Section 6 NEW STD IN PROCESS

Computer Special Systems Part HlmIbering Conventions

~ 2-Apr-51 (Level 2:

Requirements)

Standardi:l;es the application of the Unified NUDIbering Code (UNC) for identification of part numbers assigned and controlled by Computer Speciilll systams (eSS).

STATUS: REV A(X04j 2-Apr-al OUT FOR ENG. COMl'l. REVIEW 2-Apr-51.

Depart:nent: CSS Engineex-ing Responsible Person: Andy White

Stds. IItJmt. Group: Engineering Information and Documentation Sta~ards

DEC STD .112, Section 7 Unified Numbering Code: 74 Class Part Nuiribering Conventions and Assignment Procedures

FOR INTERNAL USE ONL.Y

Rev. A 19-Feb-51 (Levell:

Requirements and Procedures) A~STRACT: Defines the requirements for the aSSignment and control of 74 c'~ss part identifiers.

Deparunent: Spec ification Control Systems Responsible Persia!': Jerry Lepire Stds. Jllgmt. Group: Engineering Infor:nation and

Documentation Standards

.. ..

.. ..

.. .. .. .. _..

..

• •

• •

• •

.. •

• ..

Page 17

Table 1 (Cant' d}

DEC 3m 0'12, Section 8 NEW S;;;CTIQN IN PROCESS

f'ield Service N=bering Conventions and Assignment Procedures

DLe sm <Ill,

FOR INTERNAL USE ONL'i -

Rev. A (X00) a-Oct-80 (Level 2:

Requirements)

PBSTRAC'l'· Defines the requirements for assigr;::",.mt

"'00 control of Field Service class part identifiers srATUS: REV A (XIII) BEING PREPARED

~partment:

Responsible f'erson: -"'nn &:>stwick.

Stds. Mgmt. Group: Engireering Infonnatio" and DocUIClentation Star.dards

Section 9 lJnified Numberiug Code: 94 Class Part Numbering Conventions and

~:~~q~~0§) P26:;;~~:81

\Level 2:

Requirements)

Defines the reqllirements for the assigrun"nt

~nd control of 94 class toolil1<J part ident'fiers.

S'!'ATVS: REV A (X(J21 26-Mar-81 TO STEE~UNG COMMIT'I'~E i'lEVIEW APR 81. - - - -

DE.C 5TD ~13, Sec~ion ~ Introduction ,O"v. C 26-Mar-al (Level 2;

Re,lIirements)

Department: ~~~~~~~dS and Me~llOds Informatio;J and .'l.ec;ponsibl~ "er:;on:

3tds. :'lymt. ::;U)lIP:

DEC STD <113, Section 1

27-14ar-81

'l'ilb1e 1 (Cont' d)

Ger.eral pun)o"e Drawing SiZe" an,!

Format

Rii7':""'C 26-Mar-8l (Level 2;

Requirements)

Pao;e 18

Desc!:"ioes the drawing sizes and formats established for producing general purpose engineering drawings.

Depart;rroent; ~~~~~~~dS and M.ethods Information and Responsit:.le Person; Joe Kurta

Stds. Mgmt. Group; Engineering Information and DoclJII\entation Standards

:JEC STD <113, Sect~on 2 Standard Engineering Drawing Formats, Decals, and Forms - Preprinted Special Purpose Formats

Rev. C 26-1'1.'H-81 (Level 2:

Requirements)

ABSTRACT: Lists all preprir.ted ,mgineering d,-awing formats.

Dep,n:-tITl .. nt; Standards and Methods Information and Control

Re5jXH1Sible Perso,,; Joe Kurta

Stds. '"\gmt. Group' Engineering Informatioll and Documentation Standards

:JEC STD H3, Section 3

~~an~~~~ Eg;!;~~~~n6u~~~~i~;:w~~~~~~:nats

Rev. C 26--M..ar-81 (Level 2, Requirements)

Establish"" the format for "acb type of computer - produced engi.neer ing drawing.

Responsi:,le

Stas. :-lgmt. Engineering Information and i)Qcument'ltion Standards

.. ..

.. ..

.. ..

.. ..

.. ..

.. •

..

27-Mar-81 Page 19

Table 1 (Cant' dl

DEC S':'D ,113, Section 4

Requirements)

Lists essential prep(lnted foI'n'ls used ttrollgoout the engineerilXj o(ganizations. Included a(e 3amples of any forms that a(e (eferred to by the standards in the Digital Standilrds sy:;;tem. Examples are inclooed for id~ntification.

Department: ~~~~~~~dS and Methods Information and rtesponsiblO! Person: Je:.e Kurta

Stds. Mgmt. Group: Engineering Information and Doc<llllent"tion Standards

DEC

sm

1113, Section 5 PlCinted Circuit Mats Rev. C 2;,--Mar-8-l.(Level 2:

Requirements)

Lists mats currently used tor digitizing printed circuit layoc:ts and describes how they can be ordered.

Department: Standards and Methods information and Control

Responsible Pen;on: Joe Kurta

5tds. Mgmt. Group: Engineering !nfonnation "nd Documentation Standards

ABSTRACT: Establishes a revision cuntrol scheme for engineering drawings and docllIIIents within the preliminary, rele""e, and ECO cyCles.

Department: E:ngineering Information Central R"sl'Onsible Person, SLle ,'1cElroy Stds. Mgmt. Group: Sngine~rin'J Information and

DoC1Illlentation Standarcs

EL " 7665 INDEX

DEC 3m e15 CHANGE

27-Mar-81 Page 2'

Taole 1 (Cant I d)

Abbreviations and Units of Measurement Rev. B IJ-Jan-77 (Levell: Requirements) Requires that dOC\.IIDentation for commerce in European Econanic COOIIIunity (EEe) use SI (metric) units of measurem .. nt and unit symbolz for all quantities, This standard also provides abbreviations for l.lSe on engineering drawings.

COIWersiun factor$ for cOlmlonly used USA customary unlts are provided.

STATUS: CHANGE :~l !>RIXESS

Department· Standards and MethodS Information and Control

Responsible PerSG~1 Allan Kent

Stds. Mgmt. Group: Engineering Information and DocUIn'1!ntation Standards

~rinte<l Wiring Termin~

Rev. A (XIil5) 1l->{ov-80 (Level 2:

Guidelines)

consistent usage of !'rinted Wiring terms in Engineering and Manufacturing doclJrrt"nts.

STATUS: Rev. A (XII5) ll-Nov-8Wl OUT FOR ENG.

COMMITTEE REVIEW 13-FEB 8~

Department: rrocess Quality Mgmt.

Responsible Person: Deve Nevala Stds. i"Igrnt. Group: ~!~~r!~~~ess and Quality

C"l.'porate Quality COfltrol Poli"-Y

Centr~l ;)uality Assurance Person: Dennis Maj ikas Group: Mfg. Process and QU<llity

Assurance

•

•

•

• _{.. ..}

Page 21

T4ble 1 .(Cont'd)

DEC STD "18 OBSOLETE 21-Jun-79

Lettering

Decimal Dimens.i[,,~ing Standard C:HANGE PLANNED Rev. A 1968 (L.:vel 1: Requirements) TO QBSOLo:n; AND

Desc~ibes p~ocedClres for using decimal

t>< .... DEC STD 114 dimensions and rounding off even and odd det:imals

SECTION 1 to a lesser number of places. A fraction '~o decimal equivalent chart is part of this standard.

STATUS: TO 8E OBSOLETED ONCE DEC STD 114, SEC. 1 APPROVED.

Dep<lrtment: Standards and Methods Information and Control

Responsible Per~.on: Joe KClrta

Stds. :<\gmt. Gn lp: Engineering Information and DoclJl!lentation Standards

Casting Stand~

RE"J. A 9-Dct-72 (Levell: Requirements) E:stabl ishe" rules and design gClides to be used in the preparatiof' of drawings to define machined castings.

Department: Standards and I~ethods Information <Ind Control

Responsible Person: Joe KClrta!B. Majors Stds. Mgmt. Group: Engineering Information and

Documentation Standards

Harness Drawings -REPLACED 8Y DEC STD ~22

EL , 7665 INDE!X paqe 22

Table 1 {Cont' d)

DOC 8m "22, Secti::>I!" Cable and Harness Doc.JIlIencation:

~~ntif:'cation Eequirem'i!nts Rev. D 13-Dec--SIil {Le-"el 2: Requirements) Defines the part and numbering system for caoles 0100 harnesses.

Department: e!odule pro,:'i!SS Management Responsible Persor:: Ste-Je Spaulding Stds. M;;mt. Group: O:.'1gineering Information and

Documentation Standards

OO:C sm 022, Section 1 Cable ",nd Harness Documentation:

•

~~\~:g~~'¥e-vel

2: Requirements) . . ABSTRACT: Defines the drawing n,quirements for cable and harness design/asse,;tbly documentation.

Depcortment: Module Pr::>cess Manaqement Responsible Person: Steve Spaulding Stds. !>\gmt. Group: Engineering Information and

DoclJmentation Standards

Schematics - REPLACED a'l ^DeC sm "56

JE2 STu ~<4, Section 0 DRB 1"6A, ORB 1,,7, and ORB H'BA Format

~~~'~i ~q 1~~~;~8 ~y :(Le~:rU i ~ em~~~ui

remen tS) Describes the drawing directory llSed to list all drawi,,-';!s and variations required to :!1anl.lfactl.lr" a unit or option.

Department: Standards and Methods Infcrmation and Control

Responsi.ble Stds. Mgmt.

• •

•

..

EL , 7665 INDEX Page 23

Table 1 (Cont'dl

DEC STD 024, Section 1 DRB 126A Format Dri'lwinq t.l.rectory:

Requirements

Rev. A la=sep-91i1 (Levell: Requirements) ABSTRACT. Dtlfines the inCormation content requirements for drawin<;! directory format: ORB 126A, Which is used to list all drawings and documentation required. to lIIlUIufacture modules.

Department. Standards and Mathllds Infonnation and Control

Re$ponsiDle Person: 30e Kurta

Stds. I'Igmt. ;;roup: E:ngtneGrill9 Information and.

Documentation ii':.andards

DEC STD "25, Section 0 Parts Lists - Gene.:al Requirements Rov. C 26-Mar-91 (T.evel 1: i'iiiqUI'tements) ABSTRACT: Establishes the informath~1"! content and format for parts list$ used 1n t.he design and manufacture of Digital hardware products. The gener!!l requirements are provided for both manual and au,,;anated parts lists.

Department. Engineering Informdti<.on Control Res90nsible Person. Sue McElroy

Stdos. "gmt. Group. Engineering Information and Documentation Standards

DEC STD "25, Section 1 Manual Parts Lises

ReV~ e la-Sep-a" It-evel 1: Requirements) Provides detailed infocmation requirements for manual parts lists.

Department: Enqineering Infermation Control Responsible Person. 8',e McElroy

Stds. Mgrnt. Group: Eng:neering Information and Docwnene",tion Standard ..

EL &; 7665 INDEX 27-Ma~-8l Page 211

Table 1 (COnt' d)

DEC STD 025, Section 2 Automated PII~ts Lists

DEC STD 026

Rev. B l8-Sep"~" (Levell, Requirements) Provides detailed informatior. requirements for automated parts lists.

Department: Engineering Infomation Contt'ol

~~~ns~~~ ~~:~: ~~r!~~:Y

InfoCllation and • Documentation Standards

Hybrid Assembly Documentation:

!fE'1i STD tN PROCESS Requirements Process Rev. A (X,3) I-Sep-80 (Levell:

Requirements and Procedures) .'\BSTRACT: Defines the requirements and process for release ancl control of a hybrid assembly and its related substrate.

srATUS: ~a31 i-See-Sa OUT FOR EC REVIEW •

Department: Standards ancl Methods Information and Contr"l

Responsible Person: Jo~ Kurta

Stds. Mgmt. Group: Engineering Information and Documentation Stand.ards

flEC STO il27 LSI!VLSI Documentat'ion: Requirements NEW SrD PtANNED

NOT SCHEDULED Defines the requiremem:s and process for release and control of Engineering Documentation for nelll in-house custom LSI!VLSI design information.

STATUS: NOT STAATED

Department: Standards 'inc! Methods Information and Control

Responsible Person: JOEl Kurta

Stds. JoIgmt. Group: Engineering Information and Documentation 3tand~rds

.. ..

.. .. ..

.. • _{.. ..}

• .. ..

... • ^..

P"9. 25

Table 1 (Cont'~

DEC: 5'1'0 028 Phase Review pcacess N::';~ STU PLANNED ~X01) S-Sep-80 (Levell:

~~OT SCHEDUL£D Requlce!tlents)

Defines the avecal1 "tnx:tuce of the Fhase Review Pcocess foc both hardware and software proc'.ucts. It names the ph;!ses, establ isheS phase exit criteria, identifies a minlmum set of milestones within each phas .. , addresses phase transition me'!tings and identifies reference information • STATUS: NOT AVAILABLE - AWAITING INPUT FROM EOMC Departmen:': Engineering Operations Management

Conunitte~

Respon:!'ible Person: Charlie Picariello Stds. Mgmt. Gr-oup: Product and Program l'Iano:gement

~hi", COM System: Requirements ~ng..

NSW STANDARD Pr-o(.edur-e

IN PROCESS ~«2) HI--Mar--Sl \Lellel 2:

Requirements and Procedure) Defines requirements and procedures f"r proC'essing releilsed computerized design i"lformation on graphic computer o<!tput miccofilm (COM)_

FOR INTERNAL STATUS: R .. II_ A(X02; 10-I1<'.r-81 OUT TO LIMITED REVIEW

USE ONLY' 27-MAR-Bl

Department, Mllanced Documentation Systems Respcn.:;ible Pe~son: Roy smith

Std:>_ Mgmt. Gcoup, Engmeering Information and Documentation StandardS

27-Mar-81 Pag:e 26

Table 1 (Cont'd)

Module Manufacturing Standard CHfu'lGE PI.ANNED Rev. E flS-Jan-Sl (Levell: Requirements) NOT STARTED

ABST~CT: Describes the module manufacturing capability of Digital and the circuit layout standards and procedures which allow that capability to be optimi:l:ed. Contains all th'l rules that ensure the circuit design engineer a fast and economical module, and Product Line Manager volume deliveries aur ing 1..le production life of his/her product.

STATUS, CHANGE REQUO:STS R£CEtVEDi SCQs BEING

~

C1epartment: TSS ?roducibility Engineering Respo.1sible Person: Dick Du,11o", Stds • . 'lqmt. Group, ~;~/:~~~ess and Quality

DEC STO ,'31, Section ~ CHANGE: IN PROCESS

Product Sedaliz.'l.tion and Identification Rev. C 9-0ct-BfI (Level 2: Requirements) Provides a unifcrm serial numbering and ldentification scheme and format for all saleable Ji'Jital products.

DEC STD iJ31, Section 1

ECQ ML0.n TO ENG. COMMITTEE AND QC M:>RS 19 REVIEW MARCH 1981

Manufacturing Product Safety Person, Bill F;.sch~r Group, ,"lfg. Pro,:,~.ss and Quality

Assurance

Product Seriali'l:ation and Identification -

.. ..

.. ..

.. .. .. ..

• .. ₁₀

• •

DEC

sm

~31. [ection 2

27--f11ar-81 Pao;e 27

Table I (Cont'd)

Product Sariali:.:ation and Identification - Pl"nt Code IdentifieI"s

Rev. A 9-Oct-8il (Level 2: Requirements) Lists plant code identifiers used to mark products wi th their place of rnanuf<lcture.

Department: DEC Standards Administration Responsible Person: Bev Simonetti Stds. ~mt. Group: iIIfg. Process alld Qu.lit'j

Assurance Vax lI.rchitecture So:andard 1~--Jul-8" (Levell: Requirements) Provides a definition of the VAX architectLJre. Provides a complete de.,cription of I:he VAX central process()r hardw3re ilS seen by machine language programs.

BASIC ARCHITECTURE INSTRLlC':'ION FORMATS

AND ADDRJi.SS!NG MODES Rev A 5-May-8'"

MEMORY MANAGEMENT

PROCESS STRllCTUPE SYSTEM ARCHITECTURE IMPLfCAtrONS PRIVILEGED REGISTERS AND CONSOLE f'DP-ll COMPATIBILITY MODE

Appendix B ~~

12-May-30

2l-1'\ily-8~

Table 1 (CQnt'd)

Appendix F INSTRUCTION SETS AND 01' CODE ASSIGNMENTS Rev A Appendix

a

MULTIPRECISION AAITH-

~ ApP',ndix I PDP-ll TO VAX-ll

CONVERSION GUIDE Appendix J ADD!.eSS VALIDATION

RULES

Llepartment: VAX Architecture Responsibl" Person: Tom Eggen;

SLds. Mgmt. Group: Software and Architecture Standards

Page 28

3TD <133, Sect~on e Microfilm Aperture Cards - Creation and Dlstrlbutl.on Process

Rev. A HI-Apr-a" (;;'evel 2: Requirements) nescribes microfilm aperture card "reation and distribution p~Qcess for engineering documentation. It "lso defines the forroat and qu"Uty requ':rements for illicrofilm aperture cards,

~nd provides the procedures for est"blishing "nd m"intaininq " ""icrofilm Reference Library.

DeFart.-nent: 2ngine"rinq Information Micrograpnics Responsible Person: B"b Marshall

3tas. !>\gmt. Group: Engineering Inf;]rmation and C>ocumentation Standards

.. .. .. .. .. .. .. _..

.. ..

• _{.. ..}

.. •

DEC sm 0'133, Section 2

Table 1 (Cont I d)

Microfilm Reference Libracy Set~

and Maintenance Procedures

paqe 29

Rev. A ll'l Apr-SWI (L.wel 2, Pcocedures) Provides procedures for establishing a MLcrofil,,\ Reference Library for miccofilm apecture cards.

De[Ja~LTlent' Engineecing Information Micrographi"s RE'sponsib:e Person, Irene Fredette

Stds. !1gm':. Grollp: Engineering Information and Document"~_ion St<lndards

Plotted Ma!'.tllr Artwork Specific,ations and Acceptance C, ~ '"e ria R""v. A(X~") 22 Oct-!l~ (Le?el 3, .'eqlliremenls)

Standard Engineering preprin' eo Form..lts Replaced by DEC STD "13

::CEC ::>TO J~l ':HANGiO DI <'1'.OeES:;>

Standard Coded Charclcter ".et

::lepar~ment: ',AX Arch.t .. ctur>;

e<esponsible Pccson: Tom Eggers

Ads. ,~mt. CrO'"P: Soft' .. ar.; & Arch.i.te,:t..lr" Stdndards

(Cont.'d)

DLC STD ~S2, SECTION II

S~gnal oeUnitions and speci(ll ter.;,,, used in Serial Data Communications.

COPYRIGHT 1981il Dep<lrtnent: Hardware Design Assurance Responsible Person: ilanj it Si"lgh Stds. ~lgmt. Group: Hardware Design Assurance

J:':C STD ~52, Section 1

WTERNAL 11S£

ONLY ::>eElnes the operational interface

characteristics of serial terminalS and seri(ll system inter£,lces operating as rnan'~al originate or answer or as ~utomatic anSWer data terminal equipments (OTEs) c()nnectec to either "data leads only" or ~full-modem control" point-to-point modems (DCEs) whose interfaces generally c()nform to ErA standard RS-232-<:

or CCITT recommendation v.28. This standard also covers manu",l and automatic disc'Jnnection of tne DTE at t.he end of a call. The operational Characteristics also apply to many cases where the electrical 1nterface does not conform to RS-232-<: or V.2S; for example, a modem integral t.o a terminal.

Hardware Design Assurance.

Person: Kanj it Singh Mgmt. Group: Hardware DeSign Assurance

..

..

EL • 7665 INDEX

NEW STO IN PROCESS PROCESS

CHANGE PU>.NNED NOT SCHEDULED

2711ar-Sl Page 11

Tabla 1 {Con!:'dl

Electrical Requirements For Binary Interfaces That Conform To EIA RS-232-C or CCITT V.2B

Rev. AtxilJj 13-Jun-S9 {L6vel 1:

Requirements}

Defines the mlnilDlD. electrical '.ntarface requirements for the driVers. receivers, ilIOO interconnecting cable lIS8d to connect ores to OCEs and modems in accordance with EtA RS-232-C or CCITT V.2B.

STATUS: AWAITING INPt..'T FROM ORIGINATOR Department, ~ardware Design Assurance Responsible Person: Ranj it Singh

Standards MgnIt. Group: HilIrdware Design Assurance

Purchase Specifications: Guidelines Rev. a 24-Hay-79 (Levell: Guidelines) Establishes the generilll instructions and responsibilities for the preparation and. control of Digital Purchase Specifications.

Oeparbnent: Specifications Control Systems Responsible Person: John Peachay Stds. Mgmt. Group: Components Engineeri.ng and

Specifications

DEC STD "56, Section" Lagle Symbology - Circuit Schematic RaqUlrements

Rev. C 27-Jun-Bil (Level l:

Requirements)

ABSTRACT: E:stablishes the format and requirements for Logic SymbolO9y used by Digital Equipment Corpention including the requirements for schematic lO9ic diagrams, and the composition and form of symbols. This section also establishes general guidelines for a Logic Symbol09Y Ilan<:lboolr..

Oepilirtment: Engineering Information Control Responsible Person: Tom Witowski S!:ds. ~mt. Group: Engi.neering Information and

Documentation Stillndillrds

DEC S1'O i1S6, Section 1

Pao;1e 32

Table 1 (Cont' dl

SYmbology - Oistinctive Shape [.oqic

~ !lev. C 27-Jun-8<1 ([.evel 1, Requirements)

J\BSTRACT, Provides detailed requirements for the use of distinctive-shape logic symbols in schematic logic diagrams so t'l .. t logic functions may be lmderstood directly from either the shape of the symbol o( the notation W'ithin the symlxll.

Depa(tment: Engineerinq Information Control Responsible Person: Tom WitoW'Ski Stds. Mgmt. Group: engineering Information and

D:lcumentation Standa(ds

DEC STD il56, Section 2 Complex (Uniform-Shape) [.09ic Symbols Rev. C 21-Jun-81l ([evei 1:

Requirements)

PrClvides detailed rec;uirements for the llse

·~f complex (wliform-shape) logic symbols in schematic logic diagra~s.

Department: E1gineering Infor:nation Control Respcnsiole Person: 1'01'1 Witowski Std". I"Igmt. Gr.:>up: En"ineering Information and

D:lcumentation Standards

DEC sm

i1"".

Sec';:ion 3 Oiscrete Electronic and Electromechanical

~~~:o~e2i-~iiri-tg~s

(Levell: Requirements) ABSTRACT, Provides detailed requirements for representing , iscrete electrical-mechanical com?Qnents on schemati:: logic diagrams.

Department: i':ngineering Information Control Responsible Person: Tom Witowski Stds . . '\gmt. '-;rollp: Sngineering Inform<ltion and

Documentation Standards

E:L , 7665 INDE:X 27-Mar-81 Page 33

Tatle 1 {Cont'd}

DEC sm ~S6, Section 4 Electdcal Interconnections Between

~~:h2c 2;:wn:~0

^(Levell: Requirement.s) I'.8STRACT: Specifies the requirements for electrical connections bet .... een logic symbols, and provides relles for the else of siqnal mnemonics in the connectio'ls.

Depart.ment: Engineering Information Control Re~f"Jnsible Person: Tom WitoYfflki Stds. Mgmt. Group: Engineering Information and

Documentation Standards

DEC STD 1156, Se7:tion 5

E.stablishes the procedures and requirements for obtaining waivers and eKceptions to this standard.

Department: engineering Ir;formatian Cont.rol Responsible Person: Tom Wlt<?Yfflki Stds. Mgmt. Group: Englneerlng Information and

DocUlllentation Standards

LJEC 51'D ~5f), Secth" 6 Symbology - Glossary of Terms Rev. C 27 Jun-80 (Levell: ReqClirements) AdSTRACT: Provides definitions for certain terms

"sed en DE:C STU "'56.

Department: Engineering Information Control rtesponsibie Person: To,? Wito .... ski St.ds. Mgmt. G(oup: Sn::jlneering Inf:>rmation and

Documentat.ion Standards

Page 34

Table 1 (Cvnt'd}

DOC sm 056, Section 7 Symbology - Current Lcgk Function Labels and Curnmt Pin Label Definitions

CHA.'1GE IN PROCESS TO RESTRUCTURE

Rev, C 27-Jun

ae

(Levell: Requirements) Provides a list of current logic function lab~lo; 0100 pin label definitions.

Department: E:ngineering Information Control Resp,)flsible Person: Tom Witowski St(js. !'!gmt. Group: E:ngineering Information and

Documentation Control

Incoming Ir.spection Procedure Rev. A 29-Mar-71 (!:.evel 1: Procedure)

DEC STD .,59, Section J Inc01 ... ing Inspection Pcoce<'111re~J General

FOR INTERNAL USE ON!::::.

?~ ilev. BIX",]) IS-Mar-al (;:evel 1: Policy and Requirernent~)

Establishes the general policy regarding requirements and resr><msibilities for Incoming Inspaction Procedures.

STATUS: ,UN B(X\)]) IS-M."-R-81 OUT FOR LIMITED REVIEWl-~

Department: Standards and Methods Information C"ntrol

Responsible Person: Joe Kl.lrta

Stds. Mgmt. Group: Mfg. Process and Quality Assurance

.. ..

.. ..

.. .. _..

.. ..

.. .. •

.. _oj>

.. .. ..

, _..

.. ..

., .'

^II~

'. '.

'.

EL 6. 7665 INDeX Page 35

Table 1 (Cont'd)

rEC STD ~59. Section 1 PAVES Incoming rnlpection Documentation Re9uiremen~

FOR INTERNAL

@'"E ONL'l

Rev. 8(XIl5) IS-Mar-Bl (Level 2, Requirements)

Describes requirements for the Incoming I:lspection documentation on the Part Analysis vendor Evaluation System (!?A\/ES) •

STATUS' REV 8(XIl5) 18-I'\AR-81 OUT FOR LHUTED REVICw

~-19 JAN 81~---

Dep<..rtment, Component E:ngineering Responsible Persor.: Joe S"lliveau Stds. Mgmt. Group: Cornpor,ent E:ngineering "nd Specifications

aEC STD '-l~9. SeetiNl ;< Incoming Inspection Procedures - Fabrication And PlastiCS

FOR INTERNAL USE ONL'l

Rev. A(X~2) 18 Mar-81 (Level 2, Requirements and ProcO!dures)

",erson: Fret: spring

Group' Mfg. Pc,,"",ss and Quality ,,"ssurance

Pag-e 36

Table 1 (Cont'dj

DEC srD (159, Section 3 ~~~~:J~ie!nSpection; Standard o~r"'t~

Rev. A,:<£I2) 18~dr-81 (Level 2:

FOR INTERNAL USE OOLY

Requirements)

;;:st/lblisht.!s the minimlXn requirements tJc doccmlentin;J standard ope::-atiD1 proce<1"r!!s for Incoming Inspection areas. Defines flow of materials arxl f:lnn.s, methods of iC:entif;'catim'l and t--:aceabilit'{, methods to control measuring equipment, arxl the required qualitf documentation for InCOl1ling Inspection 'ireas.

STA','US, REV A(:<(l2) 18-Ml\R-81 OUT FOR LIl'UTED iH:VIEW _ . I-APR-Sl

D<;.partment, Standards and I>H!th,..,ds Information Control

Responsible C'erson, Dennis IoIaj <ltas

Stds. Mgmt. :=;roup: Mfg. Process ;:;,,0 Quality Assur"llce

JEC ST:J ~6J, Secticn J

FOR INTERNAL USE ONL.!

De':ines the intentions, responsibilities and controls for designing and certify:ng Digital hardwara proeuc::s to meet the requirements of nationally - arrl internationally - recognized organiz<:tions.

Depa(tment: Hardware Des!gn Assurance Respow"ible Person; Dick Amann Stds. Mgmt. Group, .~ardware Design Assurance

..

.. • .. _{.. ..}

• ^.. ..

.. ..

EL , 7665 INDEX P~e 37

Table J. (Cant' rI)

DEC' 8m ~6~, Sf'ction 1 Design and Cettification of Hardware, etc. - Spe";lflc Requitements

FOR INTeRNAL USE ONLY-

Rev. A 16-o<;t-B0 (Levell: Requirements) Lists the specific Digital standards and external regulations and standards that apply to Digital's hatdwate products.

Department, Hardware Design Assurance Responsible Person: Dick J\mann

Stds. Mgmt. Group, Hardware Design Assurance

Supports DEC

sm

060 req'.lirements by

<'_escri!:Jing the usual procedure for sUbnitting t,draware to regulatory agencies. Provides checklist to ensure ?roduct has illl necessary ap;>rovals • STATUS: AXil0 BEING PREPARED

Department: Hardware Design Assurance Resj)Onsible Person: Dick Mlann

Stds. Mgmt. Graup: Hardware :.elSign ASSurrance

DLe STD ~92 CHANGE IN PROC<:SS TO RESTR.UCTURE

"inish and Color Standatd

;{ev D. li-May-19 (Levell: RequireIuents) AS SHOWN BELOW NatE: Revision D is made up of ReVIsion C dated

lS-Sep-77 and ECO EUIl092-il-00003 dated ll-'lay-79.

RESTRUCTURE OF DEC STD "92 INTO FOLLOWING 3 SECT!UNS IS BEING INVESTIGATED

27-Mar-81 Page 38

Table 1 (Cont.'dJ

Dec STD a92. Section ~ NI'l'I SECTION

Finish and Color Standards: Specification of Paints and Finishes

Provides the minimum requirements for specification of finish aoo color on Engineering documentation. Includes defiflition of 3-4-3 finisn/

color identifier and references detailed specifica- tions ".mere specific requirement~ ror approved finiSh/colors are documented.

STATUS: AWAITHIG INPUT

Department: Manufacturing Metals Engineering Responsible Person: Art Clockedile

Stcls. Mfmt. Group: ~:~~;:~~~ring Process and Quality

Finish and Color Standard: Requirements for Material SUEpllers

REV. E(XIl2) 23-JAN-Sl (LEVEL 1:

F.EQUIREMo:NTS)

ABST'<i\CT, Provides requirements for Material S<.ip[Jliers I?roviding paint or finish materials necessary to meet detailed il92 finish/material specifications.

STATUS; REV E(XIl2\ 2S~JI\N-81 OUT FOR LIMITED REVIEW Department: Manufacturing Metals Engineering ResponsilJle Person; Art Clocke<:lile

Stds. 11fmt. Group' ::~~~:~~~ring Process dnd Quality

• •

• •

• •

• •

• • • • • • • _•

• •

• •

•

.. ..

.. ..

.. .. ..

•

..

• .. .. .. _..

.. .. ..

•

27-fllar-81 page 39

Tablft 1 (Cont I dl

DEC STD "92, Section 2 NEW Sr;CTlON

Finish and Color Standard: Requirements (or Paint Applicators

AWAITING INPUT Rev. E (' ... 2) 4-Apr-dl (Lev"l 1:

Requirements)

provides information reqllired by !><lint applicators to meet the requirements of detailed "92 finish material specifications •

STATUS: REV E(XWl2) 4-APR-Bl OUT FOR LIMITED REVIEW Department: Manufacturing Metals Engineering Responsible Person: Art Clockedile

Stds. Mfmt. GroLlp: Manufacturing Process and Quality Assurilnce

S"-qineering Change Orders Rev. E 12-.1an-78 (Levell: procedures) Pertains to a unified pr<lceciure for sutmiss:'on of Engineering Change Orders. All eng ineer ing drawings dnd documentation filed in Engineering [:.:lcurnent Control Centers can only b",

"hanged by the procedures outlined herein. ~CC's are

"ontrolled and issl.led by the Engineering S .. rv~"es groups within E:ngineering.

Department: Engineering Information Control Responsible Person: Nancy Moore Stds. Mgrnt. :>roup:

Section: Snqineerinq Cha,'ge Orders -Hardware

"ev. F(XIlI) 23-Jun-8!'1 (Levell: Policy and Requirements)

Describes the policies, procedures, and ,ui:lelines '..!Sed to "reate EGOs for Digital hardware • It also specifies the responsi.bilities and roles M"signed to the various i:1dividuals and organizations

~hat create, administer, and imp ament them .

EL & 7665 INDEX Page 48

Ta,lle 1 (CQnt'd)

DEC STD 1;:\1, Section 2 engineering Change Crders - Purchase Specific~~

Rev. F(Xt'l2) 17-Apr-110 (Level 2: Policy arod Requirements)

ABSTRACT: Describes the policy and procedure for ch'lflging purchase specifications. Also specifies responsibilities an,] roles assigned to various individuals and organi:;:atbns involved in purchase specification ECO process.

STATUS: REV. F (X02) 17 APR 80 IN LIMITED !'.£VIEW De~rtment, Specification Control Systems Responsible Person, John Peachey Stds. ~mt. Group:

• •

Diagnostic Eng ineering Change and Patch Ord"rs (DECO'S and DEJ>O's) . . . Rev. FIXfl4) 2~ 'Jan-8l ,Level 2: Policy

and Procedures) . -

ABSTRACT: A l .. vd 2 standard that descr ibes the policy EOL GECO's, m:PQ's, and Submissions of new ::Hagnostk products to the Sof.tware Distribution Center. Also specifies r,,"spo[lsibilities and roles of involv"'l1 :>rgani:;:ations.

STATUS, REV. F(X04) TO ENG. COMMI'ITEE REVIEW IN 23 APR-81

Department: Diagnostic Systems E:ngineering Responsible Person: Gunars Zagars

;:~~e~:~io~rouP' Engineering Information and

• _•

OI';C STD li10, Section 4 P[J\.NNED

Tlilble 1 (Cont'd)

Field Service C;-"ange orders (FCO's) Page 41

~OT STARTED ABSTRl\.CT: A Levell docwnent that describes the NOT ."V"'I~LE fX>licies and procedures used to create FCO's.

Although a standalone docUlIlent, it is an eJl;tension of the ECO process describe-: in Section 1. Det",'.ls ttle implementation procedu~·e for FCO's, and sp"'ci ies the financial reportinq involve<:i.

STATUS: AWAITING iNP'JT FROM ClJSTOMER SE:RVICES Depan .. "IeClt:

ReF,:>onsibl" Person: Ann Bostwick.

S::ds. Mgmt. Group: Customer Services and Repair

Manllfa("turing Operations Plan for.

~=~~mgl~f~~~~t~~~~elnf: Te;;.;:~:;y)

Presents a policy for the structure of a Manu£actllring Operations Plan b r all prodllct lines and bllsinesses within Digital F,qllipnent Corporation.

This ."Ianuf",cturing Operations Plan allows product 1i;1' and b,",s~ne!;ses the flexibility to assure that cor "Is are lmplem"nted so all products are prc>duced in conformance to specifications.

STATUS 1 RE'! D(X0~) 3-MAR-81 OUT FOR EC, QBOD REVr,;',y 6 - M A R - 8 1 - - - - :Jepartment; 2entra:

Responsi):)le Person:

~~~;,,~~t. Group:

EL i 7665 INDEX

m.:c STD 102 CHANGE IN PROCESS TO RESTRUCTURE INTO SEPARATE STOS AND SECTIONS AS E'OLLCWS:

P~ge (2

T~blo 1 (Cant'd)

Environmertal Standard tor Couputers and Penpherals

Rev. C 12-.1an-73

ABSTRACT: DefinoO's the environmental conditions to whict, products mark.eted by Digital Eguipnent Corporation must conform before being considered acceptable for shi~ent.

Department: ~vironmer.tal ~gineering Responsible Pen:on: E'. Grimaldi Stds. Mgmt. Group: Hardware Design Assurance

DEC 3m lU2, Section 0 NE'" SECTION

Environmental Standard for Computers and Periphe«lls - General Test Requirelllents Rev. D(Xel) IS-feb-al (Levell:

uSC S-l") In, Section 1

~I:'''; SECTr.JN

DEC STD 1~2, Section 2 N&i SECTION

ReqL!irements)

REV D(X",-) OUT FOR ACOUSTICS "RO']? REVIEW - REVIEW COMMENTS BEING WORKW APR 81

Temperature, Humidity, and Altitude Test ReqUirements

Rev. D(X"l) 16-Feb-81 (Le~-el 1:

Requirements)

REV D(XUl) OUT FOR ACOUSTICS GROLIP REVIEOI' - REVIE~I COMMENTS BEING WORKED APR 81

Mechanical Sh'J<:k. and Vibration Test Requirements

Rev. D(Xfll) 16-Feb-Bl (Levell:

Requin';lIents)

STI'.TUS: REV D OUT FOR .;COU5TICS GROilP P.EVIEW -

DEC ST!) 132, Section 3 Physical Sta~ilit·i.Requirements During N&i SECTION Shipolnq ann Handl.nq

Rev. D(X001 P-O~t-79 lLevel 1:

Requirements)

AWAITING LNP:JT

• ..

• •

•

27~r-8l Page 43

Table 1 (Cont'd)

DEC STD 102, Section 4 ).IJ;}<{ SECTION

Acoustic Noise Test Requirements Rev. D(X00) 2l-Jul-S0 (Levell:

I).I PROCESS Requirements)

D(X00) ll-Jcll-B0 TO PROD. ACOUSTICS GROUP REVIEW - ReVIEW COMMeNTS anNe w:JRKED APR 81

DEC STD 1~2 Section 7 ::HANGE IN PROCESS

EMI/:lectroR!aqnetic Interface Rev. B 9-Nov-78 (Levell' Requirements) Defines the electromagnetic environment that Digital products can be expected to be subjected to and define the limits of the electromagnetic interface that these devices are allo...ed to produce.

Department, Electromagnetic Compatibility Responsible Person, peter Boers Stds. ''lgmt. Group, Hardware Design Assurance

Electromagnetic Compatibility (EMCl Hardware Design Requirements Rev. A(X00) 20-May-S0 (Levell:

Requirements)

Department:, Hardware Design Assurance Responsible Person: Peter Soers Stds. M::Imt. Grcup, Hardware Design Assurance

DEC STD 103, Section 1 FCC Labeling And User Manu",l Information Rev. A 18-Dee-S0 (Levell: Requirements) Provides an overview of the process for labeling equipment and modifying c1ser manu"ls in response to E'CC regulations cited in E'CC R~les Part lS.J.

Department, Engineering Information Cont,ol Responsible Person: D:ln Call

Stds. Mgmt. Grollp: ilQrdware Design Assurance

27-Mar-81 Paqe 44

Table 1 (Cont' d)

DEC STD 103, Section LA FCC Non-Compliance Labeling Rev. A 18-Dee-80 (Levell: Requirements) Describes the policy for labeling applicable Digital equipment that has not been verified or certified as complyil'13 with FCC regulations cited in FCC part lS.J.

Department: En:-ineering Infornl<l.tion Control Responsible Person: lkIn Call

Stds. Mgmt. Group: Hardware Design Assurance

DEC STD 1~3, Section 16 NOW SECTION IN PROCESS

FCC Compliance Labe..!!.!:!.'i Rev. A(X'''1l lS-Apr-BI (Levell:

Requirements)

ABSTRACT: Describes the policy for labeling applicable Digita! "!quiprnent that has been verified OJ; certlfied as complying with FCC requlations cited in FCC Rules, Part lS.J.

Depart.-nent: Engineering Information Control Responsible Person: Don Call

Stds. Mgmt. GJ;oup: Hardw"'J;e Deslgn Assurance

VEe STD 103. Section IC FCC Com["liance Equipment User Information

~fl-/ SECTION IN PIl.OCESS

!D~DD~D

AasrRACT: ;;escribes the po~icy for associating user information with Digital eq~ipment that has been

"JeriEied or certified as cOllplying with FCC regulations cited in FCC Rul.·s, Part 15.J.

.. ..

.. ..

.. .. ..

.. .. ..

.. .. .. _{.. ..}

.. ..

.. .. ..

.. ..

..

.. ..

.. ..

.. .. ..

, , .. .. .. _..

.. ..

•

.. ..

..

E[' & 7665 INDEX Page 45

Table 1 . (Cont''::')

O;;:C ST!) lJ3, Section ID FCC Certification Approval Process NE}< SECTION IN

PROC:;:SS ABSTRACT; Describes the process for verifying or certifying Digital equi;:>ment as complying IOIith FCC regulations cited in FCC Rules, Part lS.J • srATUS, WAITlNG INPU'"

De,:>"rtment, Hardware Design Assurance Responsible Person, Peter &..ers Stds Mgmt ~roup, Hardware Design AssUL.nc,"

Radio Interference (RFT) Emission' Acceptance Levels For Diqital Hardware Products

Rev. A(Xa,,) 2>'l-+lar-3a (Levell' Requirem"nts)

Jepart..llent: Hardware Desl-gn ASSClrance Re'i;:>onsi':Jle Person, Peter Boers Stds. "~gmt. Group; Hardware :::tesign AssClranc<'

DEC STD IB, Sectior. 3 :-;ZW SECTnll III PROCESS

:;:lectromaqnetic Interference (EM.I) 1~~CCl;~~!: i ;i'~du~~~imum Require:nents Rev. A(X@0) 2@-Mar-Ba (Level L RegClirements)

Hardware Design Assurance Person; peter Boers Graul': Il<Irdware Design Assurance

EL " 7665 INDEX Page 46

Table 1 (Cont I d.)

OEC STO liB. Section 4 N;:;W SECTION IN PROCESS

nEC STD 1..,4

R6quitements)

Depattment: Hardware Design Assurance Respor.sible Person: Paul Rey

Stds. Mgmt. Group: Hardware Design Assutance

~EW STD IN PROCESS

Product Acoustic Noise Acceptability Rev. A (Xillil) 27-Aug 8il (Levell:

i<Eo7fHCTE:D :lI3T!l.IFlI)1'I;)N

Requirements)

ABSTRACT: Defines acceptabl11ty criteria fa!:"

aC:JUS~lc nuise emitted from Oi'lJ,tal products and

"r'Jups of products.

S1'ATUS: REV. A(X0il) 27-AUG-Bil

H.

REVIEW B'i PRODUCT ACOUSTICS GROUP -REVlEW C:JMMENTS aliNG WbRkeD APR 91

Departlllent: Product Acoustics ~roup Responsible Person: aob Lot:;:

Stds • . 'lqmt. ~rollf': C1ardware Design ASSlltanCe

DJ,splax ;;ork Station Ergonomics (Human Factors)

Rev. A\Xil3) lS-Mar-al (L,,"vel 1:

ReCjultements) Not Available

STA":'US: REV A. (XIil3) la-MAR-al GUT FOR l.IMI·:ED REVIJ::W 21il-MAR-Bl

:Jepartment:

Re~ponslble Person: Charles Abernethy Stds. /'\gmt. Group: Hardware Design AS::;llrance

• •

• • _•

• •

• •

• •

• • • _•

• •

• •

• •

• •

• •

..

.. ..

..

Table 1 (Cont'd)

Standard for In-House .... cceptance Procedures

Paga 47

Rev... ll1-Der.-73 (Levell; Procedclre) ABSTRACT, Outlines the general steps to be followed in cre;;oting an ;;occe~'tance ~rocedure for ;;oIL systems

~nd options manuia<;ture<l by Digital. Included are, ,omputers, computer options, special systems, interfaces, etc.

Department, In-House Fi .. ld Service Responsible Persen; Steve Hoyt Stds. :o1gmt. Group: Mfg. Process and Quality

Assurance

DEC 3TD lJ7, Sec don J :Jiqital Standard for Terminal Keyboards Standard Keyl:>eard Layout.,>

Rev. B 3--Jan-Bj ,wever 1; Requirements) ABSTRACT; Defines req;lirement'> for keybond lajouts, keyboard codes, and key pads to be used for all terminal designs that are inUoduced into production after January 1, 1979 •