Electrical scanning probe microscopy approaches to investigate solar cell junctions and devices
Texte intégral
Documents relatifs
Technological advances in biphotonic and light-sheet microscopy together with the development of methods in tissue clearing represent innovative solutions for
Figure 3c shows the KPFM positive photovoltage across the en- tire TiO 2 /P3HT-COOH surface (right-part of the image) upon illumination.. This up-shift of V cpd upon illumination
The comparison of these two KPFM maps highlights the link existing between the presence of the passivating oxide (underneath the poly-Si layer) and the observed potential drop
Multiscale probing is not limited to atomic-force microscopy and can be extended to any type of scanning probe technique in nanotechnology, including piezoforce
Figure 6 : Finite element modeling of the temperature field (left) around one heat source corresponding to the array in the 0.8µm period case.. The colour legend reports
We first apply the method to a set of simulated theoretical plants to assess its performances on plants with controlled architectures. In particular, based on the hypothesis
Five methods of exoplanet detections are shown: radial velocity measurements which are described in the text (blue stars); Transiting planets which uses the dip
à impulsions multiples, une diminution de la tenue au flux laser est observée avec l’augmentation du nombre d’impulsions, même si on peut rencontrer quelques exceptions.[ 14 ]
